I'd like to build an openxsensor with 2 temperature sensors, rpm, and the ability to read a channel and output to a pin a pwm 30 times a second.
Before I build the hardware, does an Arduino have enough power to do all that?
Sent from my Pixel 2 using Tapatalk
Need 30hz PWM out on a pin based on a channel input
Moderator: rainer
-
- Posts: 23
- Joined: Mon Apr 18, 2016 10:40 pm
- Country: -
Re: Need 30hz PWM out on a pin based on a channel input
Yes.
It is possible with an Arduino.
It is possible with an Arduino.
-
- Posts: 23
- Joined: Mon Apr 18, 2016 10:40 pm
- Country: -
Re: Need 30hz PWM out on a pin based on a channel input
I'm now realizing 8 bit pwm is standard. I was hoping for 10 bit at something around 30hz. I think I can do that on pin 11 using timer1.
Sent from my Pixel 2 using Tapatalk
Sent from my Pixel 2 using Tapatalk