Hello,
I begin to build a hub module with voltage reader. I should like to use an ads1015 and not an ads1015 because I have already one ads1015. It's a problem ? Do I need to do some change in the code ?
Thanks for your help.
Pierre
Replace ads1115 by an ads1015
Moderator: rainer
-
- Posts: 7
- Joined: Mon Jun 02, 2014 5:03 pm
- Country: France, Metropolitan
Re: Replace ads1115 by an ads1015
I presume you mean "not an ads1115" instead of "not an ads1015".
I never tested with ads1015 but I exepect that you have to make some changes in the code because resolution is lower (12 bits instead of 16 bits) and perhaps also because conversion speed is not the same.
An ads1115 module is less than 1.5 € on aliexpress.
I think easiest is to buy an ads1115.
I never tested with ads1015 but I exepect that you have to make some changes in the code because resolution is lower (12 bits instead of 16 bits) and perhaps also because conversion speed is not the same.
An ads1115 module is less than 1.5 € on aliexpress.
I think easiest is to buy an ads1115.