Replace ads1115 by an ads1015

Development & General Chat for the superb openxvario project.

Moderator: rainer

Post Reply
pierrotm777
Posts: 7
Joined: Mon Jun 02, 2014 5:03 pm
Country: France, Metropolitan

Replace ads1115 by an ads1015

Post by pierrotm777 »

Hello,
I begin to build a hub module with voltage reader. I should like to use an ads1015 and not an ads1015 because I have already one ads1015. It's a problem ? Do I need to do some change in the code ?
Thanks for your help.
Pierre :)

mstrens
Posts: 1435
Joined: Fri Dec 27, 2013 7:49 pm
Country: -

Re: Replace ads1115 by an ads1015

Post by mstrens »

I presume you mean "not an ads1115" instead of "not an ads1015".

I never tested with ads1015 but I exepect that you have to make some changes in the code because resolution is lower (12 bits instead of 16 bits) and perhaps also because conversion speed is not the same.

An ads1115 module is less than 1.5 € on aliexpress.
I think easiest is to buy an ads1115.
Post Reply

Return to “OpenXVario - an open source vario supported by the open source firmwares!!”