ACS758 50U problem

Development & General Chat for the superb openxvario project.

Moderator: rainer

Post Reply
bbq
Posts: 31
Joined: Fri May 11, 2018 5:31 pm
Country: -

ACS758 50U problem

Post by bbq »

Why can't I change to ten digits in (define MVOLT_AT_ZERO_AMP)? If I set it to 600, I normally say A in TX, but when I change to 620, there is a problem. In TX, it means 294996736.0 A. The value in consump is 238565. But it changes to Only one hundred digits. It is normal to connect to (efine REFERENCE_VOLTAGE). Can't have hundreds of digits, but only thousands of digits?

Post Reply

Return to “OpenXVario - an open source vario supported by the open source firmwares!!”