GY63 vario add frsky vario Vari-H
Moderator: rainer
GY63 vario add frsky vario Vari-H
normal i use 1 vario sensor is GY63,today i try addon frsky vario Vari-H,it ok work why ?
Re: GY63 vario add frsky vario Vari-H
before use GY63 on frsky X8r it ok,yesterday think i have frsky vario Vari-H sensor ,try connect 2 sensor,is work and work fine .... 2 sensor ID is different ???
Re: GY63 vario add frsky vario Vari-H
It is normal for both to work at the same time as long as the sensor physical ID is set to a different value.
Re: GY63 vario add frsky vario Vari-H
OXS gy63 is use normal set,and frsky vario Vari-H sensori no set ID use normal
Re: GY63 vario add frsky vario Vari-H
Then all is good as you can see...
Re: GY63 vario add frsky vario Vari-H
Telemetered numerical values, better than using one
Re: GY63 vario add frsky vario Vari-H
if i conect 2 gy 63 on 1 pro mini need set different 12C ID ?
Re: GY63 vario add frsky vario Vari-H
gy 63 CSB pin to VDD ?
Re: GY63 vario add frsky vario Vari-H
or CSB to PS ?
Re: GY63 vario add frsky vario Vari-H
i check oXs_config_advanced.h gy63 ID is 0,an frsky vario Vari-H ID is 0,why can use together ? frsky sensors ID download/file.php?id=6955&sid=078618554 ... 778421683f
Re: GY63 vario add frsky vario Vari-H
two sensors together use
Last edited by bbq on Mon May 14, 2018 12:17 pm, edited 3 times in total.
Re: GY63 vario add frsky vario Vari-H
only conect frsky vario Vari-H sersor no change to 0m ?
Last edited by bbq on Mon May 14, 2018 11:18 am, edited 1 time in total.
Re: GY63 vario add frsky vario Vari-H
frsky vario Vari-H Buy it back. No change any.
Re: GY63 vario add frsky vario Vari-H
how can see frsky vario Vari-H ID?
Re: GY63 vario add frsky vario Vari-H
two sensors use,GY63 vario + frsky vario Vari-H
https://youtu.be/Q20AG9iy07A
https://youtu.be/Q20AG9iy07A
Re: GY63 vario add frsky vario Vari-H
https://www.youtube.com/watch?v=alZfqbgxtBc
today i try gy86 + frsky vario Vari-H
today i try gy86 + frsky vario Vari-H
Re: GY63 vario add frsky vario Vari-H
i use FROS
Re: GY63 vario add frsky vario Vari-H
because i have FrSky Vario H,want add together use,i think two sensors Comparable will good than 1 sensor ?
Re: GY63 vario add frsky vario Vari-H
It makes little sense to use 2. Just use one that works well.
I don't think FrOS supports multiple sensors of the same type anyway.
I don't think FrOS supports multiple sensors of the same type anyway.
Re: GY63 vario add frsky vario Vari-H
openXsensor can use two GY63 and calculate the average values. The idea was, to reduce noise or decrease reaction time (keeping the same noise level). But tests showed, that one sensor is always fast enough and noise was never an issue with openXsensor and MS5611, even in high sensitivity (fast) configurations.
Re: GY63 vario add frsky vario Vari-H
I do not know if my understanding is correct or not. Two sensors are required to compensate for the error, but one processor is required ?
Re: GY63 vario add frsky vario Vari-H
Correct. Two sensors are read from one processor. It calculates the average of the sensors and transmits it.
Again, there is no need to do so, but you can try of course for yourself.