define SAVE_TO_EEPROM don't work

Development & General Chat for the superb openxvario project.

Moderator: rainer

Post Reply
djidane
Posts: 1
Joined: Mon Nov 22, 2021 2:02 pm
Country: -

define SAVE_TO_EEPROM don't work

Post by djidane » Mon Nov 22, 2021 2:07 pm

Hi

I have a configuration which work with jeti with
-one NTC
-a current sensor
-a voltage measurement

I have activated the storage of the current consumption capacity but it does not work, when I restart it displays 0mA

can you help me please?

thank you
Attachments
oXs_config_basic.h
(11.29 KiB) Downloaded 7 times
oXs_config_advanced.h
(18.89 KiB) Downloaded 8 times


Post Reply

Return to “OpenXVario - an open source vario supported by the open source firmwares!!”