GY63 vario add frsky vario Vari-H

Development & General Chat for the superb openxvario project.

Moderator: rainer

Post Reply
bbq
Posts: 31
Joined: Fri May 11, 2018 5:31 pm
Country: -

GY63 vario add frsky vario Vari-H

Post by bbq » Fri May 11, 2018 5:42 pm

normal i use 1 vario sensor is GY63,today i try addon frsky vario Vari-H,it ok work why ? :shock:

bbq
Posts: 31
Joined: Fri May 11, 2018 5:31 pm
Country: -

Re: GY63 vario add frsky vario Vari-H

Post by bbq » Sat May 12, 2018 7:38 am

before use GY63 on frsky X8r it ok,yesterday think i have frsky vario Vari-H sensor ,try connect 2 sensor,is work and work fine .... 2 sensor ID is different ???

User avatar
Kilrah
Posts: 9666
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: GY63 vario add frsky vario Vari-H

Post by Kilrah » Sat May 12, 2018 7:49 am

It is normal for both to work at the same time as long as the sensor physical ID is set to a different value.

bbq
Posts: 31
Joined: Fri May 11, 2018 5:31 pm
Country: -

Re: GY63 vario add frsky vario Vari-H

Post by bbq » Sat May 12, 2018 7:54 am

OXS gy63 is use normal set,and frsky vario Vari-H sensori no set ID use normal

User avatar
Kilrah
Posts: 9666
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: GY63 vario add frsky vario Vari-H

Post by Kilrah » Sat May 12, 2018 8:01 am

Then all is good as you can see...


bbq
Posts: 31
Joined: Fri May 11, 2018 5:31 pm
Country: -

Re: GY63 vario add frsky vario Vari-H

Post by bbq » Sat May 12, 2018 8:10 am

Telemetered numerical values, better than using one

bbq
Posts: 31
Joined: Fri May 11, 2018 5:31 pm
Country: -

Re: GY63 vario add frsky vario Vari-H

Post by bbq » Sat May 12, 2018 8:18 am

if i conect 2 gy 63 on 1 pro mini need set different 12C ID ?

Carbo
Posts: 336
Joined: Fri Aug 02, 2013 6:55 pm
Country: Germany
Location: Freinsheim RP

Re: GY63 vario add frsky vario Vari-H

Post by Carbo » Sat May 12, 2018 9:13 am

bbq wrote:
Sat May 12, 2018 8:18 am
if i conect 2 gy 63 on 1 pro mini need set different 12C ID ?
Yes, mstrens describes it in chapter 4.1 of "oXs_config_description.h"

bbq
Posts: 31
Joined: Fri May 11, 2018 5:31 pm
Country: -

Re: GY63 vario add frsky vario Vari-H

Post by bbq » Sat May 12, 2018 11:18 am

gy 63 CSB pin to VDD ?

bbq
Posts: 31
Joined: Fri May 11, 2018 5:31 pm
Country: -

Re: GY63 vario add frsky vario Vari-H

Post by bbq » Sat May 12, 2018 11:18 am

or CSB to PS ?

Carbo
Posts: 336
Joined: Fri Aug 02, 2013 6:55 pm
Country: Germany
Location: Freinsheim RP

Re: GY63 vario add frsky vario Vari-H

Post by Carbo » Sat May 12, 2018 11:30 am


bbq
Posts: 31
Joined: Fri May 11, 2018 5:31 pm
Country: -

Re: GY63 vario add frsky vario Vari-H

Post by bbq » Sat May 12, 2018 12:18 pm

i check oXs_config_advanced.h gy63 ID is 0,an frsky vario Vari-H ID is 0,why can use together ? frsky sensors ID download/file.php?id=6955&sid=078618554 ... 778421683f

Carbo
Posts: 336
Joined: Fri Aug 02, 2013 6:55 pm
Country: Germany
Location: Freinsheim RP

Re: GY63 vario add frsky vario Vari-H

Post by Carbo » Sun May 13, 2018 12:47 pm

bbq wrote:
Sat May 12, 2018 12:18 pm
i check oXs_config_advanced.h gy63 ID is 0,an frsky vario Vari-H ID is 0,why can use together ?
Hmmm, good question Can you post the sensor screen with both sensors and the ID's?

bbq
Posts: 31
Joined: Fri May 11, 2018 5:31 pm
Country: -

Re: GY63 vario add frsky vario Vari-H

Post by bbq » Mon May 14, 2018 10:58 am

two sensors together use
Last edited by bbq on Mon May 14, 2018 12:17 pm, edited 3 times in total.

bbq
Posts: 31
Joined: Fri May 11, 2018 5:31 pm
Country: -

Re: GY63 vario add frsky vario Vari-H

Post by bbq » Mon May 14, 2018 11:00 am

only conect frsky vario Vari-H sersor no change to 0m ?
Last edited by bbq on Mon May 14, 2018 11:18 am, edited 1 time in total.

bbq
Posts: 31
Joined: Fri May 11, 2018 5:31 pm
Country: -

Re: GY63 vario add frsky vario Vari-H

Post by bbq » Mon May 14, 2018 11:03 am

frsky vario Vari-H Buy it back. No change any.

bbq
Posts: 31
Joined: Fri May 11, 2018 5:31 pm
Country: -

Re: GY63 vario add frsky vario Vari-H

Post by bbq » Mon May 14, 2018 11:09 am

how can see frsky vario Vari-H ID?

bbq
Posts: 31
Joined: Fri May 11, 2018 5:31 pm
Country: -

Re: GY63 vario add frsky vario Vari-H

Post by bbq » Mon May 14, 2018 12:05 pm

oXs_config_basic.h
(11 KiB) Downloaded 92 times
oXs_config_advanced.h
(18.51 KiB) Downloaded 75 times

bbq
Posts: 31
Joined: Fri May 11, 2018 5:31 pm
Country: -

Re: GY63 vario add frsky vario Vari-H

Post by bbq » Mon May 14, 2018 12:16 pm

two sensors use,GY63 vario + frsky vario Vari-H
https://youtu.be/Q20AG9iy07A

Carbo
Posts: 336
Joined: Fri Aug 02, 2013 6:55 pm
Country: Germany
Location: Freinsheim RP

Re: GY63 vario add frsky vario Vari-H

Post by Carbo » Tue May 15, 2018 5:04 am

bbq wrote:
Mon May 14, 2018 11:09 am
how can see frsky vario Vari-H ID?
Go to the telemetry screen in your model menue. The numbers displayed are shifted by 1.
Sensor ID.png
Sensor ID.png (10.73 KiB) Viewed 1284 times
- what do you want to achieve using two GY63?
- what do you want to achieve using openXsensor and additionally FrSky Vario H?

bbq
Posts: 31
Joined: Fri May 11, 2018 5:31 pm
Country: -

Re: GY63 vario add frsky vario Vari-H

Post by bbq » Tue May 15, 2018 5:47 am

https://www.youtube.com/watch?v=alZfqbgxtBc
today i try gy86 + frsky vario Vari-H

bbq
Posts: 31
Joined: Fri May 11, 2018 5:31 pm
Country: -

Re: GY63 vario add frsky vario Vari-H

Post by bbq » Tue May 15, 2018 5:49 am

i use FROS

Carbo
Posts: 336
Joined: Fri Aug 02, 2013 6:55 pm
Country: Germany
Location: Freinsheim RP

Re: GY63 vario add frsky vario Vari-H

Post by Carbo » Tue May 15, 2018 6:55 am

bbq wrote:
Tue May 15, 2018 5:49 am
i use FROS
I do not use FrOS, sorry.

Can you explain, why you want to use 2 GY63? If i know, i can edit the oXs configuration files.

bbq
Posts: 31
Joined: Fri May 11, 2018 5:31 pm
Country: -

Re: GY63 vario add frsky vario Vari-H

Post by bbq » Tue May 15, 2018 8:19 am

because i have FrSky Vario H,want add together use,i think two sensors Comparable will good than 1 sensor ?

User avatar
Kilrah
Posts: 9666
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: GY63 vario add frsky vario Vari-H

Post by Kilrah » Tue May 15, 2018 9:25 am

It makes little sense to use 2. Just use one that works well.

I don't think FrOS supports multiple sensors of the same type anyway.

Carbo
Posts: 336
Joined: Fri Aug 02, 2013 6:55 pm
Country: Germany
Location: Freinsheim RP

Re: GY63 vario add frsky vario Vari-H

Post by Carbo » Tue May 15, 2018 9:55 am

bbq wrote:
Tue May 15, 2018 8:19 am
because i have FrSky Vario H,want add together use,i think two sensors Comparable will good than 1 sensor ?
openXsensor can use two GY63 and calculate the average values. The idea was, to reduce noise or decrease reaction time (keeping the same noise level). But tests showed, that one sensor is always fast enough and noise was never an issue with openXsensor and MS5611, even in high sensitivity (fast) configurations.

bbq
Posts: 31
Joined: Fri May 11, 2018 5:31 pm
Country: -

Re: GY63 vario add frsky vario Vari-H

Post by bbq » Tue May 15, 2018 11:38 am

I do not know if my understanding is correct or not. Two sensors are required to compensate for the error, but one processor is required ?

Carbo
Posts: 336
Joined: Fri Aug 02, 2013 6:55 pm
Country: Germany
Location: Freinsheim RP

Re: GY63 vario add frsky vario Vari-H

Post by Carbo » Tue May 15, 2018 1:55 pm

bbq wrote:
Tue May 15, 2018 11:38 am
I do not know if my understanding is correct or not. Two sensors are required to compensate for the error, but one processor is required ?
Correct. Two sensors are read from one processor. It calculates the average of the sensors and transmits it.
Carbo wrote:
Sat May 12, 2018 9:13 am
Yes, mstrens describes it in chapter 4.1 of "oXs_config_description.h"
Again, there is no need to do so, but you can try of course for yourself.

bbq
Posts: 31
Joined: Fri May 11, 2018 5:31 pm
Country: -

Re: GY63 vario add frsky vario Vari-H

Post by bbq » Wed May 16, 2018 8:55 am

Kilrah wrote:
Tue May 15, 2018 9:25 am
It makes little sense to use 2. Just use one that works well.

I don't think FrOS supports multiple sensors of the same type anyway.
I think that you are correct. If use 2 sensors, they may make problems with each other due to errors.

Post Reply

Return to “OpenXVario - an open source vario supported by the open source firmwares!!”