RF Module Soft Power Switch for AR9x, Skyboard, 9XR-PRO

Projects that are not for RC, but are cool and worthy of development.
User avatar
MikeB
9x Developer
Posts: 17274
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: RF Module Soft Power Switch for AR9x, Skyboard, 9XR-PRO

Post by MikeB » Thu Nov 15, 2018 12:27 am

That's true, I'm probably very close to that limit, just kept inside by the diode in the battery circuit and the voltage drop across the transistor and R6. The circuit components were chosen for the bluetooth module and 3.3V supply.
So a MOSFET with a higher Vgs would be better if the radio battery is more than around 8V.

I'll need to see what other MOSFETs I have!

Edit: The AR9X uses a IRML6401 MOSFET, with a Vgs of 12V and a low gate threshold voltage.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!


User avatar
jhsa
Posts: 19392
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: RF Module Soft Power Switch for AR9x, Skyboard, 9XR-PRO

Post by jhsa » Thu Nov 15, 2018 1:10 am

I thought the Ar9x used the AO3407, well, it doesn't :)
Just checked, the ArUni uses the AO3401 which is the same but with a lower Vgs, only 12V. The 07 has a max Vgs of 20V.

You could use a zener diode to keep the gate voltage under 8V. But better to find some more suitable mosfet. If you want I can mail a couple AO3407 to you..

Thanks

João

EDIT: The AO3401 should work well, and it has a lower Vgs
Attachments
AO3401.pdf
(497.68 KiB) Downloaded 3137 times
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

Post Reply

Return to “Other Electronic Projects”