Fixing a Bad STL Model File using Netfabb Online Service (CR10 3D Printer)

Projects that are not for RC, but are cool and worthy of development.
Post Reply
User avatar
bob195558
Posts: 2065
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Fixing a Bad STL Model File using Netfabb Online Service (CR10 3D Printer)

Post by bob195558 » Fri May 31, 2019 5:29 pm

RC Wheel printed S3D Fast_broke apart.jpg


I had problems when trying to print this 1/10 size RC Truck Wheel
which I found on Thingiverse: (https://www.thingiverse.com/thing:2974605).

I am using the CR-10 3D Printer, Blue eSun+ PLA filament
and Simplify 3D slicer program.

The symptoms of my first two printing tries had areas that were not printed
and therefore some areas were not attached.
This led me to speculate that the original cad design is faulty.
But that was not where the problem was,
it was the STL Model File that was faulty.


RC Truck 1 10 Wheel_d.jpg
1) To fix a BAD STL model file go to: (https://service.netfabb.com/login.php?f ... mDH5ATEo8Y)
and sign into the Netfabb Online Service.
Note: (if you do not have an account with Autodesk you will need to create one first).

2) Press " Upload 3D model"

3) Select your STL 3D model File and press "Open" this will start the processing.

4) When done you should see "File sucessfully processed" with some other finished info.

5) Next press "Download" to your computer or to your slicer program.

So after receiving the fixed STL model file I printed it with eSun+ Yellow filament which
has been the best filament I have printed with so far.
Wheel77Final_Fixed_Simplify 3D_e.jpg

Wheel77Final_Fixed_Simplify 3D_c.jpg

Wheel77Final_Fixed_Simplify 3D_d.jpg

Wheel77Final_Fixed_Simplify 3D_b.jpg

Wheel77Final_Fixed_Simplify 3D_a.jpg

Wheel77Final_Fixed_Simplify 3D_g.jpg
Supports came off easily


Wheel77Final_fixed_May30_20190530220803.mpg
Download Video file
(7.89 MiB) Downloaded 17 times

Wheel77Final_Fixed_Simplify 3D_f.jpg
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.

3D Printing upgrades with (CR10 3D Printer): (http://openrcforums.com/forum/viewforum.php?f=85).


Post Reply

Return to “Other Electronic Projects”