Hardware help and support for the FrSky Horus. (not yet released)
3 posts • Page 1 of 1
I set up a twin motor pusher boat with differential steering via the motors. I have a switch set up so I can have the rudder or the ailerons do the differential steering. The problem is as an example. When I give left or right rudder and then start to increase the throttle both motors are spinning which is ok. But if I give full left or right rudder I only want one of the motors to be spinning so I can make a tight turn. Here are my screens. Maybe it's something in my setup. I have one ESC/Throttle on channel 3 and the other on channel 7.