Not sure if software or hardware bug.
Horus Telemetry reading RX values ok such as RSSi, Battery etc.
However, returning to the wigdet screen after selecting relevant widgets for above telemetry values the horus displays bars with 50% values for RSSI and Battery bar values. The actual battery widget shows 0% and 0.0V. Tried everything but perhaps I am missing something.
Setup:
open TX 2.3.7 ISRM-S-X10E 1.1.0/2.1.0EU ie all updated. Receivers tried X4R in D16 (flashed accordingly to ACCST D16 v2.1.0 )
Access RX4R (flashed Firmware Version: v1.1.3.)
As stated no problems with receivers transmitting telemetry.
Horus x10Express 2.3.7 RF Bug?
Re: Horus x10Express 2.3.7 RF Bug?
Bars meant you selected the first "Gauge" widget instead of scrolling to the "Value" one.
Re: Horus x10Express 2.3.7 RF Bug?
Thanks you for the prompt reply.
I understand your thinking makes sence for the incorret 50% value but the correct values were chosen each and every time.
Unless the radio isnt picking up the chosen widget value and displaying as you say other function. If that is the case I have no idea how to make the radio pick up the correct value.
I understand your thinking makes sence for the incorret 50% value but the correct values were chosen each and every time.
Unless the radio isnt picking up the chosen widget value and displaying as you say other function. If that is the case I have no idea how to make the radio pick up the correct value.
Re: Horus x10Express 2.3.7 RF Bug?
Hi, many thanks you actually meant the term 'value' and not as I was interpreting as an expression!
All working now.
All working now.