Horus X10 Internal Module & External R9M
Posted: Mon Jan 13, 2020 9:52 pm
I've got a Horus X10 (not ACCESS) on OTX 2.3.4
When I try to use the internal module (telemetry enabled to X8R Pro) and the external module with R9M (telemetry disabled to R9MM) together to give a redundant 2.4GHz /900MHz radio link, it all binds fine, but intermittently all servo movement stops.
Channel monitors move normally with stick inputs, telemetry remains connected & the green lights on all the receivers stay lit. There's just no movement from any servo on any channel for a few seconds, then servos will start moving again.
I've seen people on Youtube with this combination working fine, but mine's not having it at all. Anything I'm missing?
When I try to use the internal module (telemetry enabled to X8R Pro) and the external module with R9M (telemetry disabled to R9MM) together to give a redundant 2.4GHz /900MHz radio link, it all binds fine, but intermittently all servo movement stops.
Channel monitors move normally with stick inputs, telemetry remains connected & the green lights on all the receivers stay lit. There's just no movement from any servo on any channel for a few seconds, then servos will start moving again.
I've seen people on Youtube with this combination working fine, but mine's not having it at all. Anything I'm missing?