Horus X10S Express EU <--> Non EU

Hardware help and support for the FrSky Horus. (not yet released)
Post Reply
affs
Posts: 3
Joined: Fri Sep 06, 2019 6:04 pm
Country: -

Horus X10S Express EU <--> Non EU

Post by affs » Tue Sep 10, 2019 2:01 pm

Hello, I would like to know if it is possible to pass a Horus X10S Express from EU mode (LBT) to Non-EU (not LBT) and vice versa and how it should be done.


affs
Posts: 3
Joined: Fri Sep 06, 2019 6:04 pm
Country: -

Re: Horus X10S Express EU <--> Non EU

Post by affs » Tue Sep 10, 2019 5:31 pm

I have a Taranis X9D + and the process of switching from EU to Non EU and vice versa is done by recording the corresponding files "x9dpEU_mode2_20180525" or "x9dpNonEU_mode2_20180525", which can be downloaded from FRSky, in the internal transmission module of the taranis, for which one must do the following steps:
1) Copy the corresponding file to the radio's FIRMWARE directory.
2) Select the file in the FIRMWARE directory and press Enter.
3) Select and execute the Flash Internal Module option.

In principle I think that for the horus X10S the procedure has to be similar, but I can't find a file for the internal transmitter module that has the EU and non EU possibilities on the FrSky website.
I only find the file "ISRM V1.1.3"

User avatar
Kilrah
Posts: 10237
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Horus X10S Express EU <--> Non EU

Post by Kilrah » Tue Sep 10, 2019 6:51 pm

ACCESS modules are not user-switchable anymore due to EU new requirements against that.

affs
Posts: 3
Joined: Fri Sep 06, 2019 6:04 pm
Country: -

Re: Horus X10S Express EU <--> Non EU

Post by affs » Tue Sep 10, 2019 8:28 pm

Then all FrSky transmitters with ACCESS protocol are factory configured in EU or Non EU mode and the user cannot modify this configuration.

mak
Posts: 4
Joined: Fri Sep 05, 2014 6:55 pm
Country: Poland

Re: Horus X10S Express EU <--> Non EU

Post by mak » Wed Sep 11, 2019 2:50 am

To be precise ACCESS module firmware is one for all (there is no EU / non-EU). ACCST D16 mode, which is implemented in ACCESS module, has own firmware (or rather settings) - end this will be not user replaceable any more. AFAIK it should be replaceable by authorised dealers though.


Post Reply

Return to “FRSky Horus radio”