Problem flashing 2.2.4 to Horus X10S

Hardware help and support for the FrSky Horus. (not yet released)
Post Reply
ululi1970
Posts: 11
Joined: Fri Oct 25, 2013 1:25 am
Country: -

Problem flashing 2.2.4 to Horus X10S

Post by ululi1970 »

I tried to flash 2.2.4 on my Horus X10S. Both on Wndows and Mac, when I try to flash it with the radio on, I get the following error message
Cannot write /Volume/X10/FIRMWARE.BIN (reason: Unknown error)

I was able to flash it using a Mac with the Radio off. Companion is the latest version.

User avatar
Kilrah
Posts: 11109
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Problem flashing 2.2.4 to Horus X10S

Post by Kilrah »

Flashing is only possible with radio off or in bootloader mode, not while on.
ululi1970
Posts: 11
Joined: Fri Oct 25, 2013 1:25 am
Country: -

Re: Problem flashing 2.2.4 to Horus X10S

Post by ululi1970 »

Thank you Kilrah. How do you access the bootloader on the Horus X10? I tried turning on the radio with the trim tabs pushed inward, like I did on my old Taranis X9D, but nothing happens? Perhaps that feature is not available or necessary on the X10?
User avatar
Kilrah
Posts: 11109
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Problem flashing 2.2.4 to Horus X10S

Post by Kilrah »

Yes same, but that wasn't present in the first releases. Was added in 2.2.2 or so.

Envoyé de mon 16th en utilisant Tapatalk


ululi1970
Posts: 11
Joined: Fri Oct 25, 2013 1:25 am
Country: -

Re: Problem flashing 2.2.4 to Horus X10S

Post by ululi1970 »

I see it now. Thanks.

Post Reply

Return to “FRSky Horus radio”