Hello!
In 2.2.1 firmware, I can select internal antennas or internal + external, but in 2.2.2-2.2.3 I can select only Internal or External antennas. Why I cannot select internal + external? Is it possible, that it will be added in future firmwares?
x10, both Internal & External antennas on OpenTx 2.2.3
Re: x10, both Internal & External antennas on OpenTx 2.2.3
Internal+external has never existed on X10, but since that information was initially not communicated by FrSky the label was incorrect in the first versions and was updated later.
Re: x10, both Internal & External antennas on OpenTx 2.2.3
Is it the same in X10S?
Re: x10, both Internal & External antennas on OpenTx 2.2.3
Yes, the S just has different case and gimbals but is electronically the same.
Re: x10, both Internal & External antennas on OpenTx 2.2.3
This is what I thought. It also has two internal antennas (apparently as X10 no S). I'm surprised all antennas cannot be used in the same time, as in X12S.
Re: x10, both Internal & External antennas on OpenTx 2.2.3
I confirm that in the 2.2.1 I had same possibility in my Horus X10s, internal or external antenna or both .
__________________________Equipment_______________________________
TX: X9DP(B01 ver),Fw:OTx v2.2.0 EEPR 218,FwRadio:(LBT151223)
RXs: FrSky X8R(LBT151118), FrSky X4RSB(LBT170322), FrSky D4r2(LBT151118)
Mods:extAnt,6rsw,M9gimb
_____________________________
TX: X9DP(B01 ver),Fw:OTx v2.2.0 EEPR 218,FwRadio:(LBT151223)
RXs: FrSky X8R(LBT151118), FrSky X4RSB(LBT170322), FrSky D4r2(LBT151118)
Mods:extAnt,6rsw,M9gimb
_____________________________
Re: x10, both Internal & External antennas on OpenTx 2.2.3
As mentioned above, the label was incorrect.