openrcforums

I set up a separate channel for steering to follow the rudder. I need to have a separate trim on that channel which happens to be 13 so I can trim just the steering. I could use one of the knobs on the top for the steering but I don't know how to assign it.

Figured it out. Had to assign a new input.

Hey! What was your solution. I was trying to do the same thing, gear on Ch13 mixed to rudder and use T5 switch on X10 for the steering trim.
Under Mixes.
Ch 13
Source : Rud
Weight (+100%) No trim
Source : Trm5 Weight (+100%) Include Trim
Multiplex ADD

Just would like to know how you did it!

Cheers, DSA