changing sensor ID on FLVSS

[tonnie78]

I want to use two FLVSS battery sensors on one airplane.

No I understand that I need to change the sensor ID on one of them.

According to the FrSky website this can be done with their FUC-3 in combination with the small diode board.

I have downloaded the S.Port Tool also from FrSky website. This comes with a manual also showing the procedure with an FUC-3 but when I start the program it does not recognise the FUC-3. There is a Pull Down Menu next to connect. There you should select the COM port.
It does not show any COM port in the list to select. I have reinstalled the drivers for the FUC-3 and it does show up in my device manager as COM3

I have also tried on three different laptops with variations of Windows versions without a positive result.

Does any body have a clue what I am doing wrong?

[MikeB]

You will need the FUC-3 plugged in and showing in device manager before you run the SPort tool.

Mike

[tonnie78]

I jave the FUC-3 plugged in and visible in device manager before starting up S.port tool but no change. Still invisible.

[MikeB]

What is the name and date on the SPort tool file? Mine is FrSky_SPORT_tool_20140221.exe dated 21/02/2014 13:20.

Mike

[tonnie78]

I have the same date. 2014-02-21

[MikeB]

Try typing com3 into the box, then click connect.

Mike

[tonnie78]

I can not type in the box

[tonnie78]

Sorry you where right. It works

[tonnie78]

So simple. Now to get my sensors back from my friend so I can change sensor ID

[tonnie78]

Thanks Mike