Tunigy 9XR pro - all controlls and switches inverted HELP

tgy9x is a fork of er9x, and is the default firmware that is released by hobbyking on the Turnigy 9XR transmitter.
Post Reply
Aigars
Posts: 1
Joined: Thu Oct 08, 2015 6:40 pm
Country: -

Tunigy 9XR pro - all controlls and switches inverted HELP

Post by Aigars »

Hi,

Recently got Turnigy 9xr pro and after recharging the LiPo all controlls suddenly went inverted. Left is right and up is down and so on and on. Even the 3 way switch starts with id2.

Has anyone seen, or dealt with something like this before, please help, pulling my hair out, going bold, loosing it


Thanks

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Tunigy 9XR pro - all controlls and switches inverted HEL

Post by jhsa »

Hi, welcome to the forum.. Your first few posts must be approved. Safety measure against spam. So, before posting the same again, please wait until a moderator approves your post ;) :)

About your radio.. It is very strange that happening after recharging a LiPo?? :o
Never seen that happening.. So, what exactly did you do? Did you connect the radio to the computer using eepskye? Please give us as much information as you can.

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Post Reply

Return to “tgy9xr”