Problem of non steady channels.

tgy9x is a fork of er9x, and is the default firmware that is released by hobbyking on the Turnigy 9XR transmitter.
Post Reply
User avatar
Kilrah
Posts: 10559
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Problem of non steady channels.

Post by Kilrah » Fri Apr 24, 2015 2:30 pm

You don't mention what RF module and receiver you're using nor what settings you've changed from the defaults on your model configuration.


Trailfox
Posts: 1
Joined: Fri Apr 24, 2015 1:37 pm
Country: -

Re: Problem of non steady channels.

Post by Trailfox » Fri Apr 24, 2015 8:32 pm

I use the standard Mode 2 X9 from Hobbyking. My RF is the 9X V2 and the receiver is the 9x 8c V2. Everything is standard in my model config. I just want the channels reach 2000 instead of 1450 what they reach now. Is there any setting that i missed?

ReSt
Posts: 1540
Joined: Tue Dec 27, 2011 11:34 pm
Country: -

Re: Problem of non steady channels.

Post by ReSt » Sun Apr 26, 2015 10:21 am

Did you calibrate the sticks and pots?

Reinhard

Daedalus66
Posts: 1839
Joined: Tue Dec 27, 2011 8:22 pm
Country: -
Location: Ottawa

Re: Problem of non steady channels.

Post by Daedalus66 » Mon Apr 27, 2015 1:43 pm

Is there a calibration option in the stock firmware? I don't see it in the manual.

User avatar
jhsa
Posts: 19295
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Problem of non steady channels.

Post by jhsa » Mon Apr 27, 2015 1:50 pm

Yes, there is.. I remember doing it once just for the fun (or not ;) ) of it..

http://www.hacksmods.com/2012/08/flysky ... ion-howto/

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW


Post Reply

Return to “tgy9xr”