Turnigy TGY9X Precompiled OpenTx Build

tgy9x is a fork of er9x, and is the default firmware that is released by hobbyking on the Turnigy 9XR transmitter.
Post Reply
highlandcows
Posts: 7
Joined: Wed Aug 13, 2014 5:34 pm
Country: -

Turnigy TGY9X Precompiled OpenTx Build

Post by highlandcows »

Is there a pre-compiled downloadable build of OpenTx for the Turnigy TGY9X, or do I have to build it from the sources?

Thanks

User avatar
KAL
Posts: 552
Joined: Thu Oct 10, 2013 4:36 pm
Country: Germany
Location: somewhere near Rothenburg ob der Tauber

Re: Turnigy TGY9X Precompiled OpenTx Build

Post by KAL »

Just download OpenTX companion.
There under 'settings' - 'settings' you can configure OpenTX for your needs.
Then under 'file' - 'download' you can download your "tailor-made" ;) firmware file.
Also this firmware can be burned to the TX with OpenTX companion.

Klaus
( TH9X / 9XTreme / FrSky DHT / Spektrum / Multi / RotEnc )
( 9XR PRO / erSKY9x  / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
highlandcows
Posts: 7
Joined: Wed Aug 13, 2014 5:34 pm
Country: -

Re: Turnigy TGY9X Precompiled OpenTx Build

Post by highlandcows »

Thanks much. I'll play with it and see what I can do with it.
highlandcows
Posts: 7
Joined: Wed Aug 13, 2014 5:34 pm
Country: -

Re: Turnigy TGY9X Precompiled OpenTx Build

Post by highlandcows »

Is there anything that explains what the checkboxes on the settings screen control? If I select "opentx for 9xr, there are a lot of options, but the online help doesn't appear to explain them.
User avatar
Kilrah
Posts: 11107
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Turnigy TGY9X Precompiled OpenTx Build

Post by Kilrah »

Just hover the mouse cursor over them, a description will appear.

highlandcows
Posts: 7
Joined: Wed Aug 13, 2014 5:34 pm
Country: -

Re: Turnigy TGY9X Precompiled OpenTx Build

Post by highlandcows »

Thank you. Missed it.

Post Reply

Return to “tgy9xr”