Turnigy 9xr CH output CPPM

tgy9x is a fork of er9x, and is the default firmware that is released by hobbyking on the Turnigy 9XR transmitter.
Post Reply
Marduk
Posts: 1
Joined: Fri Jul 25, 2014 2:38 pm
Country: -

Turnigy 9xr CH output CPPM

Post by Marduk »

hello guys. i have a problem i am hoping someone can help me out. I have a turnigy 9XR that i loaded OPEN tx on it. im using a Frsky tx and a D4R-ii on CPPM mode in a mini quad.. the flight controler is a Flip32. ok.. so here is the problem.. when i am seting up the receiver in the Baseflight software the Roll, pitch, yaw, throttle are idle at 2023 and when i move the sticks it will go down to 1196 but that it.. im not sure why it is doing this im new to the Open tx and don't know much of how to program it. any input would be a great help. thank you.

add note. the the aux's work fine the move form 996 to 2023

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Turnigy 9xr CH output CPPM

Post by jhsa »

Did you calibrate the sticks on the radio? If not go to general settings and then to the calibrate menu. Then follow the instructions..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Post Reply

Return to “tgy9xr”