TGY9X + TGY9X8C v2 Switch help

tgy9x is a fork of er9x, and is the default firmware that is released by hobbyking on the Turnigy 9XR transmitter.
Post Reply
RogerRabbit
Posts: 1
Joined: Tue Dec 04, 2018 2:03 am
Country: -

TGY9X + TGY9X8C v2 Switch help

Post by RogerRabbit »

I am using PPM and ACRO mode 2 and would like to use the switch marked as AUX3/F.MODE/[MIX] to control 3 cameras but can't find any info in the user manual on how to enable it or what channel its on. I have also been trying without success to enable CH6. If I select DISPLAY in the settings menu and then select the auto test by pressing + and - then CH6 works fine with the others.
Any help would be much appreciated by this newcomer.

Post Reply

Return to “tgy9xr”