Newbie to trx ID swith

erskyTx runs on many radios and upgrade boards
ersky9x was a port of er9x for use on the sky9x board.
Post Reply
bgpoppatow
Posts: 9
Joined: Wed Dec 30, 2015 5:51 am
Country: -

Newbie to trx ID swith

Post by bgpoppatow »

Hello and thanks for having me. Ive been searching through the posts and cant find help for my question. Probably a no brainer but on my turnigy 9x with smartieparts extreme board flashed with ersky 9x9xt my mode switch ids come up as ID,,,IDwith up arrow..and IDwith down arrow. Can any body tell me wich ones are ID0..ID1..ID2? Thanks in advance...bgpoppa

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Newbie to trx ID swith

Post by jhsa »

ID0 - Up
ID1 - Middle
ID2 - Down

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
OctavioS
Posts: 657
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

Re: Newbie to trx ID swith

Post by OctavioS »

jhsa wrote:ID0 - Up
ID1 - Middle
ID2 - Down

João
This has changed recently from numbers to arrows, just as shown by João.
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
User avatar
MikeB
9x Developer
Posts: 17979
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Newbie to trx ID swith

Post by MikeB »

I changed this to match the display of any 2-position switches that are changed to 3-positions ones. The arrows are intended to show where the switch is, i.e. ^ for switch up.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Newbie to trx ID swith

Post by jhsa »

But as far as I can see it is still not changed everywhere.. Only place is probably the DiagSwitch menu? Everywhere else seem to still display ID0/1/2.

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
MikeB
9x Developer
Posts: 17979
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Newbie to trx ID swith

Post by MikeB »

I probably haven't posted test versions since I changed the source files. Just checking on my 9Xtreme, it shows ID^, ID- and IDv everywhere.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
bgpoppatow
Posts: 9
Joined: Wed Dec 30, 2015 5:51 am
Country: -

Re: Newbie to trx ID swith

Post by bgpoppatow »

So wich is wich on the menu then...is the up arrow id0 on the transmitter or is it just id(with nothing) ? The menu presents it as choices in order as id up arrow..id down arrow...just id. that seems like it would be o...1...2,,, maybe im over thinkin it and should go fl yhe cheerson to clear the mind but I sure appreciate all the help guys and gals,
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Newbie to trx ID swith

Post by jhsa »

jhsa wrote:ID0 - Up
ID1 - Middle
ID2 - Down

João
I explained it here..´

ID0 is ID ^
ID1 is ID -
ID2 is ID v

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
bgpoppatow
Posts: 9
Joined: Wed Dec 30, 2015 5:51 am
Country: -

Re: Newbie to trx ID swith

Post by bgpoppatow »

Thanks Im diving in head first now. Like to say great place for help!!!
User avatar
kaos
Posts: 3247
Joined: Wed Dec 28, 2011 1:15 am
Country: United States

Re: Newbie to trx ID swith

Post by kaos »

the ID^, ID-... is already in r218i test version.
bgpoppatow
Posts: 9
Joined: Wed Dec 30, 2015 5:51 am
Country: -

Re: Newbie to trx ID swith

Post by bgpoppatow »

Ok so I broke the cardinal rule and deleted my sd card and firmware on my turnigy and re loaded the ersky9x xt firmware, wich is what I had in it and now my id switches are showing up as id0 id1 id2. My first firmware was downloaded on a mac and sent to the cloud and installed on my windows pc. This time around I got the firmware on my windows pc. Would that have anything to do with it.
User avatar
MikeB
9x Developer
Posts: 17979
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Newbie to trx ID swith

Post by MikeB »

The IDx switch change is quite recent, and only in test versions I've posted, not in the release version on www.er9x.com.
From where did you download your version?

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
bgpoppatow
Posts: 9
Joined: Wed Dec 30, 2015 5:51 am
Country: -

Re: Newbie to trx ID swith

Post by bgpoppatow »

I downloaded from this forum under the 9xtreme board forum from your test version list. not sure if I down loaded the same but my version says v.2644-mike...21-10-2015. Is working fine. Just thought it was strange that I was pulling out my hair then all of a sudden it was old school again

Post Reply

Return to “erskyTx (was ersky9x)”