ErskyTx Test Versions

erskyTx runs on many radios and upgrade boards
ersky9x was a port of er9x for use on the sky9x board.
User avatar
MikeB
9x Developer
Posts: 17808
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx Test Versions

Post by MikeB » Sat Dec 25, 2021 7:48 pm

I haven't really had anything to add, and my time has been taken up getting erskyTx onto the X20, doing a "universal" irmware for the older FrSky ACCST receivers, and porting erskyTx to a new Tx from FrSky (not yet announced!).

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!


User avatar
jhsa
Posts: 19475
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ErskyTx Test Versions

Post by jhsa » Sun Dec 26, 2021 11:09 pm

I have just been away doing some other stuff :) But my 9xtreme radio is behaving a bit weird lately. I guess it needs some heavy maintenance.. :) Will be back 100% soon.
I think there are a few ErskyTX menus that might need checking? Will flash the latest firmware to all my different radios and have a good look. ;)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

Rad
Posts: 440
Joined: Wed Apr 20, 2016 3:43 pm
Country: Austria
Contact:

Re: ErskyTx Test Versions

Post by Rad » Mon Dec 27, 2021 7:41 pm

Cool, I was a bit afraid of ErskyTX dying. Still refuse to replace my radio with anything else!
The only thing I'd add is when programming mixes and asigning switches, if I press PB3 or PB4 it does not work. I have to press PB1 or PB2 and manually scroll to PB3 and PB4. I never said anything because it is not too tragic and I guess almost nobody has 4 push button switches.

Ill open another thread soon with an issue I already have, about the color screen blinking in several colors. Not always happens, will write it detailed next time it happens, once I memorize the color sequence.
https://radindustries.wordpress.com/

User avatar
MikeB
9x Developer
Posts: 17808
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx Test Versions

Post by MikeB » Mon Dec 27, 2021 8:03 pm

Which radio?

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Rad
Posts: 440
Joined: Wed Apr 20, 2016 3:43 pm
Country: Austria
Contact:

Re: ErskyTx Test Versions

Post by Rad » Mon Dec 27, 2021 10:31 pm

MikeB wrote:
Mon Dec 27, 2021 8:03 pm
Which radio?

Mike
The same as always, this one: https://radindustries.wordpress.com/202 ... /my-radio/
In summary, 9xtreme with every mod I could think of :)
https://radindustries.wordpress.com/


User avatar
MikeB
9x Developer
Posts: 17808
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx Test Versions

Post by MikeB » Mon Dec 27, 2021 11:29 pm

I think I have spotted why PB3 and PB4 don't work when programming. I'll try to test a fix tomorrow.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
MikeB
9x Developer
Posts: 17808
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx Test Versions

Post by MikeB » Tue Dec 28, 2021 11:14 pm

Test version in the first post, it seems to work now.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
jhsa
Posts: 19475
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ErskyTx Test Versions

Post by jhsa » Wed Dec 29, 2021 11:10 pm

Thanks Mike..
It is great to see you here more often again. :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

macem
Posts: 2
Joined: Sun Aug 15, 2021 12:22 pm
Country: -

Re: ErskyTx Test Versions

Post by macem » Mon Jan 24, 2022 12:18 pm

macem wrote:
Sun Aug 15, 2021 12:36 pm
I really like this software, it is better than openTX, I installed it on my tgy 9XR pro and frsky Q7. But for me there is missing support for FS-RM003 modules, i have this modules in both trasmitters and I can only use PWM. Question it is possible to support i-bus, s-bus same like tgy-9x can do ?.
Thank Mike for reply, I thought that we can use code from https://bitbucket.org/KotelloRC/erfly6/ ... r/Sources/ but if this is so complicated it is not worth, we can use multimodule

Rad
Posts: 440
Joined: Wed Apr 20, 2016 3:43 pm
Country: Austria
Contact:

Re: ErskyTx Test Versions

Post by Rad » Thu Mar 10, 2022 7:45 am

Hi Mike, all the erskytx test versions dissapeared? Or are now somewhere else?
https://radindustries.wordpress.com/

User avatar
MikeB
9x Developer
Posts: 17808
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx Test Versions

Post by MikeB » Thu Mar 10, 2022 12:17 pm

I've released R223 so I believe they are not needed any more.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Rad
Posts: 440
Joined: Wed Apr 20, 2016 3:43 pm
Country: Austria
Contact:

Re: ErskyTx Test Versions

Post by Rad » Sun Mar 13, 2022 7:50 am

MikeB wrote:
Thu Mar 10, 2022 12:17 pm
I've released R223 so I believe they are not needed any more.

Mike
All clear now. Yeah, with the new R223 released there is no need of test versions.
This might be the first time I flash a release version by the way, lol.
https://radindustries.wordpress.com/

User avatar
jhsa
Posts: 19475
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ErskyTx Test Versions

Post by jhsa » Wed Mar 16, 2022 12:14 am

I need to update my radios :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
midelic
Posts: 128
Joined: Mon Dec 23, 2013 9:57 pm
Country: -

Re: ErskyTx Test Versions

Post by midelic » Thu Jun 02, 2022 6:53 am

Hi Mike.
One question,
Does erskyTX/9XR supports higher baud rate serial comm. with multi?
I want in the near future to increase the comm. speed to 400K on multi and do some testing.
If so maybe you can make a version test or a stable version with selection(100k;400k) baudrate.

M.

User avatar
MikeB
9x Developer
Posts: 17808
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx Test Versions

Post by MikeB » Thu Jun 02, 2022 11:01 am

The original 9XR (and 9X -ATMEGA64/128) uses bit bashed serial and cannot support 400K baud.
The 9XR-PRO (and SKY/AR9X boards) can support higher baud rates. The signal from the processor passes through a 100 ohm resistor before arriving at the module bay pin. This resistor may limit the baudrate.

The telemetry signal (bottom pin in the module bay) is handled separately. Would this also need to be run at the higher baudrate?

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
midelic
Posts: 128
Joined: Mon Dec 23, 2013 9:57 pm
Country: -

Re: ErskyTx Test Versions

Post by midelic » Thu Jun 02, 2022 12:13 pm

Sorry, I was not specific.I have 9xR pro so I can use 400K.
I want only for TX(9XR pro)and RX (multi) side.
Bottom pin will remain at normal telemetry rate (for the moment as we don't use so high telemetry rate anyway).
I want to move multi rx serial code to DMA and do some tests.

thanks.
M.


Post Reply

Return to “erskyTx (was ersky9x)”