I also have multi modules installed internally in my radios, I don't have a Taranis though. But the only advantage in my opinion is the screen size, as my 9x radios have all the goodies, including controlling power to both internal and external modules. I don't really miss a Taranis.
João
Sent from my BLN-L21 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
jhsa , I am going to install modules inside my pro's . I will also need to install your power switch . I like the feel of the pro better .The screen size doesn't bother me as I'm looking up while I fly . The voice has made it so much better !
antlerhanger wrote: ↑Fri Feb 22, 2019 11:46 pm
I really bought the Taranis to experiment on ..I changed the case and upgraded speaker and put M9 Gimbals in it..I was just wondering if I could unsolder the XJT module and install a internal module..No big deal as the external module will do what I need . I Use my pro as my main radio . ERSKY9X is a fantastic FW
I like your idea of using the brain of a Taranis as a base to build your own radio. I did something similar with the board of a 9XR-Pro.
Will you share some photos, please ?
Miguel
We demand rigidly defined areas of doubt and uncertainty. Douglas Adams.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
antlerhanger wrote: ↑Sat Feb 23, 2019 2:33 pm
Yes on both...I found your thread on the switch ..I will probably be asking you questions tho
It is the link Bob posted just above. But you said above that you found the thread about the switch and I thought it wasn't necessary to post the link to it anymore
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
I remember something about that several years ago.
The reduce latency info may be in the manual for the receiver and so maybe not in one of the old XJT manuals.
Last edited by bob195558 on Tue Mar 12, 2019 11:16 am, edited 1 time in total.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Updated with last test version and going to test it tomorrow
Considering that I am already using 8ch how much latency decrease should I expect from this if any?
Thanks
MikeB wrote: ↑Tue Mar 12, 2019 11:15 pm
Probably none if using 8ch mode.
Mike
Awesome!
BTW with the R9M module set to 8ch, betaflight still show rc input update of 18ms (I was expecting 9ms like with XJT)
Is this a normal behavior? changing from 8ch to 16ch doesn't see to make diference.