ERSKY9X Coding
- KAL
- Posts: 552
- Joined: Thu Oct 10, 2013 4:36 pm
- Country: Germany
- Location: somewhere near Rothenburg ob der Tauber
Re: ERSKY9X Coding
Murphy strikes ...
At the moment I have 2 Pros and 3 9XT at hand
and all 5 show this behaviour ...
Klaus
At the moment I have 2 Pros and 3 9XT at hand
and all 5 show this behaviour ...
Klaus
( TH9X / 9XTreme / FrSky DHT / Spektrum / Multi / RotEnc )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
Re: ERSKY9X Coding
Please let me flash the pro. Will report..
Are you sure you have f2 flashed?
João
Are you sure you have f2 flashed?
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: ERSKY9X Coding
Ok, flashed the PRO with the f2 version.. I CANNOT reproduce the problem.. the only field that blinks is the "Volume Control" setting..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- KAL
- Posts: 552
- Joined: Thu Oct 10, 2013 4:36 pm
- Country: Germany
- Location: somewhere near Rothenburg ob der Tauber
Re: ERSKY9X Coding
Version
Video ( TH9X / 9XTreme / FrSky DHT / Spektrum / Multi / RotEnc )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
- KAL
- Posts: 552
- Joined: Thu Oct 10, 2013 4:36 pm
- Country: Germany
- Location: somewhere near Rothenburg ob der Tauber
Re: ERSKY9X Coding
Do you have some centre beeps activated?
Without, nothing to blink.
Without, nothing to blink.
( TH9X / 9XTreme / FrSky DHT / Spektrum / Multi / RotEnc )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9X Coding
I have the fix for the "Beep Cnt" flashing at the wrong time.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- KAL
- Posts: 552
- Joined: Thu Oct 10, 2013 4:36 pm
- Country: Germany
- Location: somewhere near Rothenburg ob der Tauber
Re: ERSKY9X Coding
Thank you, Mike
Klaus
Klaus
( TH9X / 9XTreme / FrSky DHT / Spektrum / Multi / RotEnc )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
Re: ERSKY9X Coding
Mike, how come I don't see it?
Thanks
João
EDIT: Ok, found it.. KAL, you were right, if I program a center beep I can see the problem..,
That was it
Thanks
João
EDIT: Ok, found it.. KAL, you were right, if I program a center beep I can see the problem..,
That was it
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9X Coding
I've posted "f3", this has:
Fix "Beep Cnt" display bug
Save some flash space in PPM generation (mainly for "SKY" board, only has 10K free flash!).
Fix bug in DSM HACK module range check selection
Add more processing for CRSF telemetry
Mike.
Fix "Beep Cnt" display bug
Save some flash space in PPM generation (mainly for "SKY" board, only has 10K free flash!).
Fix bug in DSM HACK module range check selection
Add more processing for CRSF telemetry
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: ERSKY9X Coding
Thank you
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: ERSKY9X Coding
Thank you - will install in 9XRPro and QX7 today and report back.
regards,
peter-m.
regards,
peter-m.
Re: ERSKY9X Coding
Both loaded and look good - but just fyi - the QX7 has one detent pot (rhs - S2) and one non-detent pot (lhs - S1). I notice that the 'detent' pot option does not appear on the Calibration menu on the QX7 (but it does on the 9XRPro). Maybe missed that one, also (a la KAL's post)?
regards,
peter-m
regards,
peter-m
Re: ERSKY9X Coding
It doesn't appear on the 9xtreme also.. At least on f2
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9X Coding
Check to see if MENU LONG does, however, call up the Detent setting menu on the 9Xtreme.
On the QX7, have a look in the hardware menu, the detent settings should be there. Something else to rationalise across platforms.
Mike.
On the QX7, have a look in the hardware menu, the detent settings should be there. Something else to rationalise across platforms.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: ERSKY9X Coding
On QX7, on Hardware menu, I ticked the box for 'P2 has detent' and tried again - no messages or options changed on the Calibration menu. Restarted the radio, still no change of options or messages.
regards,
peter-m
regards,
peter-m
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9X Coding
Correct, nothing changes in the calibration menu, but the way a "pot with detent" is calibrated changes.
With a detent, you need to centre the pot along with centering the sticks, without a detent, the pot centre is simply half way between the min. and max. values. I just checked on my QX7 and that is how it works.
Mike.
With a detent, you need to centre the pot along with centering the sticks, without a detent, the pot centre is simply half way between the min. and max. values. I just checked on my QX7 and that is how it works.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: ERSKY9X Coding
Ok, it is working as you say. I was expecting a message change, like the one that shows in the 9XRPro Calibration screen when I run it, about Pots with Detent, etc.
MikeB wrote: ↑Mon Oct 16, 2017 10:11 pm Correct, nothing changes in the calibration menu, but the way a "pot with detent" is calibrated changes.
With a detent, you need to centre the pot along with centering the sticks, without a detent, the pot centre is simply half way between the min. and max. values. I just checked on my QX7 and that is how it works.
Mike.
Re: ERSKY9X Coding
Mike, I will try pressing menu in a while and will report, but I think I already did that and nothing happened.
Also, perhaps this setting should really be in the Hardware menu. The setting only changes when you replace the pots or add a slider, it is not a setting that keeps changing.
Thanks
João
Sent from my BLN-L21 using Tapatalk
Also, perhaps this setting should really be in the Hardware menu. The setting only changes when you replace the pots or add a slider, it is not a setting that keeps changing.
Thanks
João
Sent from my BLN-L21 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9X Coding
I was thinking it might be useful to be able to select the expo/dual rate options from a flight mode setting. It isn't that easy to do this directly, so I'm adding this via logical switches. For this, I'm adding a new logical switch function "v=val", and also allowing a "new" telemetry value "Fmd" for flight mode.
This means you will be able to have a logical switch be ON when a particular flight mode is selected, and then you may use the logical switch to select the expo/dual rate.
The new function may also be useful for other things.
Mike.
This means you will be able to have a logical switch be ON when a particular flight mode is selected, and then you may use the logical switch to select the expo/dual rate.
The new function may also be useful for other things.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: ERSKY9X Coding
I like the v=val function, but I'm not understanding the reason for the expo / DR thing
is that we can activate the dual rate / expo when turning a specific flight mode ON?
I thought we could already do that by just selecting the same switch for both?
Even if different switches are to be used for different flight modes, we can already AND that switch and another one in logical switches.
Now, if you said we could select different EXpo / Dual rate profiles, that would start to make sense to me
You could then apply different rate /expo settings for different flight modes, or even just different mixes..
But that is what we can do already as we have an expo setting in the mix editor, and the rate can be done with simple mixing, even better if we add our own curve.
Or maybe I am, missing something.. If so, I do apologize for being a thick bugger, with a lack of some coffee in the morning!!!
Hmmm, Dual rate / Expo profiles.... never thought of that before.. Now where is that coffee??
João
is that we can activate the dual rate / expo when turning a specific flight mode ON?
I thought we could already do that by just selecting the same switch for both?
Even if different switches are to be used for different flight modes, we can already AND that switch and another one in logical switches.
Now, if you said we could select different EXpo / Dual rate profiles, that would start to make sense to me
You could then apply different rate /expo settings for different flight modes, or even just different mixes..
But that is what we can do already as we have an expo setting in the mix editor, and the rate can be done with simple mixing, even better if we add our own curve.
Or maybe I am, missing something.. If so, I do apologize for being a thick bugger, with a lack of some coffee in the morning!!!
Hmmm, Dual rate / Expo profiles.... never thought of that before.. Now where is that coffee??
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9X Coding
Yes you can use the same switch settings for the flight mode and the expo/dr selection, although the flight mode setting allows you to use 2 switches, so then you need to and these in a logical switch.
The idea is by using the flight mode value, via logical switches, to choose the expo/dr, then if you want to change the switches that select a flight mode, the expo/dr selection will change automatically.
This was a fairly easy change, and the v=val function may well be useful anyway. Since you may use "Fmd" as a switch source in a voice alert, it also seemed a good idea to make it available in logical switches.
At some point, I will be looking at whether the existing expo/dr functionality could be improved, hopefully without losing any ease of use.
I've just also added in a "ratio" option for A3 and A4.
Mike.
The idea is by using the flight mode value, via logical switches, to choose the expo/dr, then if you want to change the switches that select a flight mode, the expo/dr selection will change automatically.
This was a fairly easy change, and the v=val function may well be useful anyway. Since you may use "Fmd" as a switch source in a voice alert, it also seemed a good idea to make it available in logical switches.
At some point, I will be looking at whether the existing expo/dr functionality could be improved, hopefully without losing any ease of use.
I've just also added in a "ratio" option for A3 and A4.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: ERSKY9X Coding
I will give it a try of course.
You know you can count on me for the ease of use thingy. I'm quite good at nagging for making the firmware more user friendly. You must hate me..
Thank you for adding the A3 and A4 alnalogs..
Are you considering moving the RxV also to the same screen? That would make easier to find..
Thank you..
João
Sent from my BLN-L21 using Tapatalk
You know you can count on me for the ease of use thingy. I'm quite good at nagging for making the firmware more user friendly. You must hate me..
Thank you for adding the A3 and A4 alnalogs..
Are you considering moving the RxV also to the same screen? That would make easier to find..
Thank you..
João
Sent from my BLN-L21 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9X Coding
I've just posted these changes, with an eepskye that supports them.
Yes, I have moved the RxV scaling as well.
Mike.
Yes, I have moved the RxV scaling as well.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: ERSKY9X Coding
Nice, thank You.. will test a bit later..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9X Coding
I have a cosmetic change coming. Because logical switch functions have been added over time, they appear in what looks like a random order.
The change is to display them in a "better" order, without causing an EEPROM change.
I have the code all working and the order is controlled by a simple table, so if this order isn't the "best", it is very easy to change.
Mike.
The change is to display them in a "better" order, without causing an EEPROM change.
Code: Select all
Old New order
---- ----
v>val v>val
v<val v<val
|v|>val |v|>val
|v|<val |v|<val
AND v~=val
OR v=val
XOR v&val
v1==v2 AND
v1!=v2 OR
v1>v2 XOR
v1<v2 v1==v2
Latch v1!=v2
F-Flop v1>v2
TimeOff v1<v2
NtmeOff v1~=v2
1-Shot Latch
1-ShotR F-Flop
v~=val TimeOff
v&val NtmeOff
v1~=v2 1-Shot
v=val 1-ShotR
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: ERSKY9X Coding
Thank you Mike !, the old order was annoying to use when programing in eePSkye.
Bob B.
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: ERSKY9X Coding
May want to look at the telemetry order too ?
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: ERSKY9X Coding
That looks good Mike, no further comments, thanks.. That looks good and organized..
Before the official release, perhaps a good idea to use the new logical switch menu, and remove the old delays from the bottom of the logical switches?
Thank you for all you do.. I had today some more successful flights with 2 of my Ersky9x radios in wireless trainer setup using the SBUS input from the internally installed DIY receiver.. It is just amazing, and a pleasure to teach someone like that and also give control using the EXTRA pushbuttons on the back of the radio..
Today I continued testing some other equipment by flying it.. all good..
I wish it wasn't so cold.. The days are already shorter..... Again
Thank you
João
Before the official release, perhaps a good idea to use the new logical switch menu, and remove the old delays from the bottom of the logical switches?
Thank you for all you do.. I had today some more successful flights with 2 of my Ersky9x radios in wireless trainer setup using the SBUS input from the internally installed DIY receiver.. It is just amazing, and a pleasure to teach someone like that and also give control using the EXTRA pushbuttons on the back of the radio..
Today I continued testing some other equipment by flying it.. all good..
I wish it wasn't so cold.. The days are already shorter..... Again
Thank you
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: ERSKY9X Coding
'.....I wish it wasn't so cold.. The days are already shorter..... Again '
Happens every year
Getting warmer where I live
Hope it keeps going that way for a long time
Happens every year
Getting warmer where I live
Hope it keeps going that way for a long time
Re: ERSKY9X Coding
Well, I don't
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW