ERSKYTx (was ersky9x) Questions

erskyTx runs on many radios and upgrade boards
ersky9x was a port of er9x for use on the sky9x board.
andrewju
Posts: 773
Joined: Tue Aug 21, 2012 7:29 am
Country: Russian Federation
Location: Moscow

Re: ERSKY9x Questions

Post by andrewju » Sun May 12, 2019 3:12 pm

Ok, I think this answers all the concerns.

Thanks, Mike! :)


antlerhanger
Posts: 155
Joined: Tue Dec 25, 2018 3:19 am
Country: United States

Re: ERSKY9x Questions

Post by antlerhanger » Sun May 12, 2019 4:05 pm

MikeB is there a 222 ERSKYTX update for the pro ? Not that I need it , everything is working fantastic . I'm using the latest test version .Just wondering

Thanks
Allen

User avatar
MikeB
9x Developer
Posts: 16580
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ERSKY9x Questions

Post by MikeB » Sun May 12, 2019 8:20 pm

I'm working on getting a release done that includes the (new) FrSky X9Lite.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

andrewju
Posts: 773
Joined: Tue Aug 21, 2012 7:29 am
Country: Russian Federation
Location: Moscow

Re: ERSKY9x Questions

Post by andrewju » Mon May 13, 2019 1:47 pm

A few quick questions from a local community here:

How to switch tracks in ersky music player? Are playlists possible?
Is music player documented somewhere?

User avatar
MikeB
9x Developer
Posts: 16580
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ERSKYTx (was ersky9x) Questions

Post by MikeB » Mon May 13, 2019 2:42 pm

In the music directory, create sub-directories, one for each "playlist". Put the .WAV files for a playlist in the directory. If you want a file in more than one "playlist" you need to put the .WAV file in each directory.
Go to the "Model Setup" and select "Music". In that menu, you may select "Configure" and then change the type to "List". In "File" you now get to choose a "Playlist" instead of a file.
Return to the "Music directory" and you may set switches to control the music playing. The "Start" switch both starts and stops the player, a "normal" switch plays while on, a "momentary" switch toggles playing. The same for a "Pause" switch.
"Next" and "Previous" switches step one place through the "Playlist" when turned on.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!


andrewju
Posts: 773
Joined: Tue Aug 21, 2012 7:29 am
Country: Russian Federation
Location: Moscow

Re: ERSKYTx (was ersky9x) Questions

Post by andrewju » Mon May 13, 2019 8:28 pm

Perfect!
Thanks a lot!!!

Toschi10
Posts: 6
Joined: Fri May 25, 2018 6:05 am
Country: -

Re: ERSKYTx (was ersky9x) Questions

Post by Toschi10 » Thu May 23, 2019 4:43 pm

Hi, Mike
I have another question....
How can I view the log of the telemetry on he pc?
I tried with opentx companion, because the file extension I've seen is the same (. CVS) But doesn't work....
Can you explain me how to view the telemetry logs?
Thanks a lot.
Best regards
Alessandro

User avatar
MikeB
9x Developer
Posts: 16580
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ERSKYTx (was ersky9x) Questions

Post by MikeB » Thu May 23, 2019 5:55 pm

A .csv file is a spreadsheet file in "Comma Separated Value" format. You should be able to open it in most spreadsheet programs (e.g. Open Office or Excel).
They are text files so will open in, say, notepad, although more difficult to read!

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Toschi10
Posts: 6
Joined: Fri May 25, 2018 6:05 am
Country: -

Re: ERSKYTx (was ersky9x) Questions

Post by Toschi10 » Thu May 23, 2019 9:01 pm

Ok thanks now I understand.
Yes I've opened with Excel, but I'd like to view the graphics. Anyway it's ok. The most important thing is to read the value.
My radio, qx7 when I shut down, in the display appears the message "eeprom busy" what does it mean? The radio work fine. Without any issues.

User avatar
MikeB
9x Developer
Posts: 16580
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ERSKYTx (was ersky9x) Questions

Post by MikeB » Thu May 23, 2019 10:00 pm

I just mark some columns, then call up a line graph on Excel or Open Office.

When shutting down, certain data is written to the EEPROM, the text "EEPROM busy" is displayed while this takes place and is quite normal.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Toschi10
Posts: 6
Joined: Fri May 25, 2018 6:05 am
Country: -

Re: ERSKYTx (was ersky9x) Questions

Post by Toschi10 » Fri May 24, 2019 9:35 am

Ok thanks ;)

AlessB
Posts: 18
Joined: Wed Mar 01, 2017 9:09 am
Country: Ukraine

Re: ERSKY9x Questions

Post by AlessB » Tue May 28, 2019 4:02 pm

MikeB wrote:
Thu Apr 04, 2019 11:29 pm
Script functions include reading the current position of a switch and resetting the telemetry.
The resettelemetry function takes a numeric parameter that specifies what should be reset:
0 – Reset Altitude
1 – Reset A1 offset
2 – Reset A2 offset
3 – Reset GPS
4 – Reset all

Mike
Hi Mike. I tried write script. I read manual script.pdf and not find function resettelemetry. I tried running my script to Interpreter.exe and wrong. Error syntax.

User avatar
MikeB
9x Developer
Posts: 16580
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ERSKYTx (was ersky9x) Questions

Post by MikeB » Tue May 28, 2019 5:57 pm

I've just posted an update to "Interpreter.exe" and an updates script.pdf.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

AlessB
Posts: 18
Joined: Wed Mar 01, 2017 9:09 am
Country: Ukraine

Re: ERSKYTx (was ersky9x) Questions

Post by AlessB » Sat Jun 08, 2019 7:31 pm

Hi Mike. And me again. I use copter and XSR receiver. But it no send RSSI to flight controller. Thanks to you has the ability ErskyTX mix to output channel and Scaler using telemetry value. But RSSI not measured in percents but decibels.Is it possible to add decibels to units, I understand that this is no critical, but it is no correct. Though RSSI may be measure in parrot )).
Thanks for your great works!

User avatar
MikeB
9x Developer
Posts: 16580
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ERSKYTx (was ersky9x) Questions

Post by MikeB » Sat Jun 08, 2019 8:16 pm

I've added "db" to the source code so it should be there when I next post a build.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

AlessB
Posts: 18
Joined: Wed Mar 01, 2017 9:09 am
Country: Ukraine

Re: ERSKYTx (was ersky9x) Questions

Post by AlessB » Tue Jun 11, 2019 12:41 pm

Thank you Mike!

Panchoeito
Posts: 2
Joined: Mon Oct 14, 2019 10:34 pm
Country: -

Re: ERSKYTx (was ersky9x) Questions

Post by Panchoeito » Mon Oct 14, 2019 10:41 pm

Hi mike. I recently received a xjt lite module to my taranis X9lite. I put the module in the tx but it didn't work. It just flash the red led once when i turn the transmitter on and then nothing happen. May it be a firmware problem?

User avatar
Kilrah
Posts: 10227
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: ERSKYTx (was ersky9x) Questions

Post by Kilrah » Tue Oct 15, 2019 7:37 am

How long does the led stay on?

Panchoeito
Posts: 2
Joined: Mon Oct 14, 2019 10:34 pm
Country: -

Re: ERSKYTx (was ersky9x) Questions

Post by Panchoeito » Tue Oct 15, 2019 5:40 pm

Kilrah wrote:
Tue Oct 15, 2019 7:37 am
How long does the led stay on?
Not even a second.


Post Reply

Return to “erskyTx (was ersky9x)”