SKY9x Ver 3.0
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: SKY9x Ver 3.0
I actually forgot to post the current draw with the sounds playing sorry. I'll do that next post.
Update..
No Blue Tooth installed.
VerB 50Ma no tx module, BL off.
RevC 30Ma no module, BL off.
SM
ShowMaster
Sent from my iPod touch using Tapatalk
Update..
No Blue Tooth installed.
VerB 50Ma no tx module, BL off.
RevC 30Ma no module, BL off.
SM
ShowMaster
Sent from my iPod touch using Tapatalk
Re: SKY9x Ver 3.0
Just a quick inquiry...the audio portion for voice featured in this thread: viewtopic.php?f=5&t=948 is in corporates on this board, correct? If so, awesome. Ordering my DJT module soon as I won't be getting a new TX anytime soon...this new board revision would be a great addition with integrated telemetry...
Crash Test Pilot!
Re: SKY9x Ver 3.0
Absolutely! here are 2 ERSKY9X board telemetry/ voice demo: viewtopic.php?f=7&t=1295
Re: SKY9x Ver 3.0
Will the USB port on the version 3.0 board allow for directly programming the firmware under companion9x?
Re: SKY9x Ver 3.0
It already does on the current version
Re: SKY9x Ver 3.0
Any updates?
Sent from my LT18i using Tapatalk 2
Sent from my LT18i using Tapatalk 2
Er9X Flashed
Speaker Mod Done
Haptic Feedback Mod Done
Telemetry Mod Done with FRSky TTL Lite
Voice Mod Done with Emartee Board
HK Backlight Done
FRSky Telemetry DIY Module Installed
----All these mods removed and installed Sky 3.0 board with DJT Module.
Speaker Mod Done
Haptic Feedback Mod Done
Telemetry Mod Done with FRSky TTL Lite
Voice Mod Done with Emartee Board
HK Backlight Done
FRSky Telemetry DIY Module Installed
----All these mods removed and installed Sky 3.0 board with DJT Module.
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: SKY9x Ver 3.0
Real close. Beta works great, boards I understand are ready for population. Does everything promised.
In fact both sky board versions work great. Anyone owning either v2 or 3 release versions will be happy.
SM
In fact both sky board versions work great. Anyone owning either v2 or 3 release versions will be happy.
SM
Re: SKY9x Ver 3.0
I'm picking up the Rev 3 boards in the morning , though I got some bad news ... that I'm not getting
as many as I thought I would get...they usually run more than I order , so I ordered counting on the extras....
but someone screwed up putting on the solder mask.
So now I can build just over 100 .... which by the size of the pre-order list are all spoken for.
I was hoping to have some boards left over for stock.....
I hope the pick and place machine is nice to me tomorrow ...if so .. I will start shipping boards next week
-Brent
as many as I thought I would get...they usually run more than I order , so I ordered counting on the extras....
but someone screwed up putting on the solder mask.
So now I can build just over 100 .... which by the size of the pre-order list are all spoken for.
I was hoping to have some boards left over for stock.....
I hope the pick and place machine is nice to me tomorrow ...if so .. I will start shipping boards next week
-Brent
Last edited by SkyNorth on Tue Nov 13, 2012 9:48 pm, edited 1 time in total.
Re: SKY9x Ver 3.0
so, does it mean you can make people who pre-ordered happy?
Re: SKY9x Ver 3.0
I hope to fill all the orders , It also depends on the yield ... some boards do not work , I had 5 bad ones last time
that I could not get working after spending many hours looking for shorts..
-Brent
that I could not get working after spending many hours looking for shorts..
-Brent
Re: SKY9x Ver 3.0
You can remove me from the list and make another guy happy!
Re: SKY9x Ver 3.0
let's keep our fingers crossed!
Re: SKY9x Ver 3.0
YOU are eyeing the X12Kilrah wrote:You can remove me from the list and make another guy happy!
Re: SKY9x Ver 3.0
I think the X9 will be more my type...
Re: SKY9x Ver 3.0
I pre-ordered but never got a confirmation yet, or information to do a payment, like to do a 10% first payment or such.
But if this all is not needed, then i will wait quietly )
Love your work!
But if this all is not needed, then i will wait quietly )
Love your work!
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: SKY9x Ver 3.0
I'd asked for two, would be happy with one if there is another that would like to get in on this fun.
Re: SKY9x Ver 3.0
If the demand is there , then I will run more boards ...I need to get this batch shipping , then I will have a better Idea
where things stand , and how much demand there will be for more.
Thanks
Brent
where things stand , and how much demand there will be for more.
Thanks
Brent
Re: SKY9x Ver 3.0
I await your invoice Brent!
Thanks,
Clive
Thanks,
Clive
Re: SKY9x Ver 3.0
Well I sure hope there are a few left over. Id love one. Sure wish I had checked this forum a few months ago.
John
John
Re: SKY9x Ver 3.0
I don't have a 9x anymore, but i'm working on another project and i was wondering what the overall board dimensions are of this assembled?
Re: SKY9x Ver 3.0
Brent, I'll
take one. Either one from the current batch or from the next batch so put me down for one.
take one. Either one from the current batch or from the next batch so put me down for one.
Re: SKY9x Ver 3.0
The board dimensions are 6.68" x 2.21"
Ok, Rick , I'll put you on the list
-Brent
Ok, Rick , I'll put you on the list
-Brent
Re: SKY9x Ver 3.0
Am i on the list? My name is John Baker
Re: SKY9x Ver 3.0
Here it is ... SKY9x 3.0
I've got lots of testing and programing and Invoice/shipping to do.
-Brent
I've got lots of testing and programing and Invoice/shipping to do.
-Brent
Re: SKY9x Ver 3.0
Drooling!
I don't see any 'jacks' on it. The 2.5 /3.5 mm stereo jack is yet to be placed or it is going to be a 'plug in' and placed any where the user decide?
Obviously there is no chance for wheel encoder to be soldered on the board with pins with that b/u batt holder. You have mentioned before there is a separate board for the wheel encoder. I guess it is going to be 'plugged' in at some I/O connector??
I don't see any 'jacks' on it. The 2.5 /3.5 mm stereo jack is yet to be placed or it is going to be a 'plug in' and placed any where the user decide?
Obviously there is no chance for wheel encoder to be soldered on the board with pins with that b/u batt holder. You have mentioned before there is a separate board for the wheel encoder. I guess it is going to be 'plugged' in at some I/O connector??
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: SKY9x Ver 3.0
Yes the audio jack is a plugin to a header and can be mounted anywhere.
ShowMaster
Sent from my iPod touch using Tapatalk
ShowMaster
Sent from my iPod touch using Tapatalk
Re: AW: SKY9x Ver 3.0
Wow, great news! like it!SkyNorth wrote:Here it is ... SKY9x 3.0
hope to get mail soon from you!
greetings from vienna,
christian
Re: SKY9x Ver 3.0
Good news! V3.0 ready to be shipped
Very nice done and congratulations!
Just send me the invoice
Greetings from The Netherlands.
edit: i don't understand the upgrade for 'Switching Regulator'. What is by default the voltage the board can work with? Now i am using LiFe 3s, that is 9.9V. I need to upgrade to use my Life accu pack?
Very nice done and congratulations!
Just send me the invoice
Greetings from The Netherlands.
edit: i don't understand the upgrade for 'Switching Regulator'. What is by default the voltage the board can work with? Now i am using LiFe 3s, that is 9.9V. I need to upgrade to use my Life accu pack?
Re: SKY9x Ver 3.0
What is the difference with the upgraded LCD?
Er9X Flashed
Speaker Mod Done
Haptic Feedback Mod Done
Telemetry Mod Done with FRSky TTL Lite
Voice Mod Done with Emartee Board
HK Backlight Done
FRSky Telemetry DIY Module Installed
----All these mods removed and installed Sky 3.0 board with DJT Module.
Speaker Mod Done
Haptic Feedback Mod Done
Telemetry Mod Done with FRSky TTL Lite
Voice Mod Done with Emartee Board
HK Backlight Done
FRSky Telemetry DIY Module Installed
----All these mods removed and installed Sky 3.0 board with DJT Module.
Re: SKY9x Ver 3.0
according to Brent the brightness and contrast is supposed to be better than the stock ones...
Here is a photo: viewtopic.php?f=7&t=4#p491
Here is a photo: viewtopic.php?f=7&t=4#p491