FrSky X10s

erskyTx runs on many radios and upgrade boards
ersky9x was a port of er9x for use on the sky9x board.
Suncoaster
Posts: 313
Joined: Thu Dec 29, 2011 10:18 am
Country: Australia
Location: Cooloola Cove, Australia

Re: FrSky X10s

Post by Suncoaster »

MikeB wrote: Tue Jul 14, 2020 9:04 pm New test version posted. I checked the operation of the external module using my T16.
The protocol editing menu has a lot of debug down the right side, I'll only need what that contains if it doesn't work!

Mike
Mike the module still fails to flash the firmware and will not bind any Receivers, it will however power off when you select a model that uses the internal module. When the flash fails it would appear to not upset the multi module as it continue to work in my X7.

Dave

Edit: Even when I bound a Rx to the multi module on my X7 and I then transferred the module to the X10S it failed to work.

The debug columns are
Col 1 Col 2
0003
0003
0002 36B0
0000 04-- to 1B--
0001 2710
0002 0100
0000 0030
counting up 0804
counting up 0001
064B 4645
counting up
0001
0002

I hope this helps

User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: FrSky X10s

Post by MikeB »

New test version posted. I think I may have this working except for PPM on the external module. I flashed the firmware to my T16 and the output looks OK, except for PPM which only works sometimes!

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
Suncoaster
Posts: 313
Joined: Thu Dec 29, 2011 10:18 am
Country: Australia
Location: Cooloola Cove, Australia

Re: FrSky X10s

Post by Suncoaster »

MikeB wrote: Wed Jul 15, 2020 3:34 pm New test version posted. I think I may have this working except for PPM on the external module. I flashed the firmware to my T16 and the output looks OK, except for PPM which only works sometimes!

Mike
Thanks Mike :D :D it appears to be working, I bound a couple of different receivers, I will flight test it either today or tomorrow. I did not attempt PPM as i never use it.

Dave
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: FrSky X10s

Post by MikeB »

Good! I have the fix for the PPM now. If you have a chance could you also try flashing the module?

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: FrSky X10s

Post by jhsa »

Mike, would it be possible to have the scanner on the other older boards? AR9x, 9Xtreme, etc? Thanks.

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: FrSky X10s

Post by MikeB »

Yes, it is in the source code for all radios/boards, I just need to get to a point where I can post a new test version for everything.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: FrSky X10s

Post by jhsa »

Thank you, I guess I will have to update my multi modules to the latest then ;) :)
I am normally quite afraid to do that, specially in the middle of the season :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Suncoaster
Posts: 313
Joined: Thu Dec 29, 2011 10:18 am
Country: Australia
Location: Cooloola Cove, Australia

Re: FrSky X10s

Post by Suncoaster »

MikeB wrote: Thu Jul 16, 2020 8:49 am Good! I have the fix for the PPM now. If you have a chance could you also try flashing the module?

Mike
Hi Mike, the module flashes fine. Once again thanks for all your time and effort it is much appreciated. :D :D

Dave
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: FrSky X10s

Post by MikeB »

I've now posted R223A3 test version for all radios. This has the changes in for the X10S external module, which should be fully working without all the debug. The MPM scanner display is also included for all radios (except the SKY board).

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
Suncoaster
Posts: 313
Joined: Thu Dec 29, 2011 10:18 am
Country: Australia
Location: Cooloola Cove, Australia

Re: FrSky X10s

Post by Suncoaster »

MikeB wrote: Fri Jul 17, 2020 4:11 pm I've now posted R223A3 test version for all radios. This has the changes in for the X10S external module, which should be fully working without all the debug. The MPM scanner display is also included for all radios (except the SKY board).

Mike
Thanks Mike, I will install it in the morning.

Dave

Post Reply

Return to “erskyTx (was ersky9x)”