Jumper T12 Multi FrskyX Not Available (R222)
Jumper T12 Multi FrskyX Not Available (R222)
Hi all,
just played around with my T12, installed erskyTX (R222) and found that FrskyX shows "N/A" when selected in the protocol settings (Jumper 4in1 Multi). Any idea what I'm doing wrong? It does work with OpenTX, so not a hardware issue.
Cheers
Oli
just played around with my T12, installed erskyTX (R222) and found that FrskyX shows "N/A" when selected in the protocol settings (Jumper 4in1 Multi). Any idea what I'm doing wrong? It does work with OpenTX, so not a hardware issue.
Cheers
Oli
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Jumper T12 Multi FrskyX Not Available (R222)
Nothing wrong. As I did with the 9XR-PRO when it first came out, FrskyX is disabled until Jumper reach an agreement with FrSky to allow it to be used on the T12. HK did reach an agreement with FrSky, so FrskyX is fully operational on the 'PRO.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Jumper T12 Multi FrskyX Not Available (R222)
Ah! Makes sense, thanks. Let me know if you need testers for FrskyX on the T12 You don't release the erskyTx source files, by any chance?
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Jumper T12 Multi FrskyX Not Available (R222)
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Jumper T12 Multi FrskyX Not Available (R222)
Mike, anyone that can compile the firmware from the source files could also activate the FrskyX support before compiling, right? Isn't that a problem?
Or is it a problem only if you release pre-compiled binaries??
João
Or is it a problem only if you release pre-compiled binaries??
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Jumper T12 Multi FrskyX Not Available (R222)
Not a lawyer, but since it's open source, anybody can make any changes to the code before compiling it. It would probably be different if he posted a tutorial on specifically how to activate FrskyX.
Thanks for pointing me to the repo, Mike.
Thanks for pointing me to the repo, Mike.
Re: Jumper T12 Multi FrskyX Not Available (R222)
That's the thing, ErskyTX is open source, the FrskyX protocol isn't Hence my question.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Jumper T12 Multi FrskyX Not Available (R222)
The implementation of the communication as done by erskytx/opentx IS open source. It's there and anyone can make use of it as they see fit for their own use. If it's for commercial purposes it might or might not be different depending on whether FrSky has some kind of protection related to that.
Re: Jumper T12 Multi FrskyX Not Available (R222)
So, in other words, the guys from the Jumper radio could just compile ErskyTX with FrskyX enabled and use it for their radio?? And that is OK?
Sorry, just trying to understand.
João
Sorry, just trying to understand.
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Jumper T12 Multi FrskyX Not Available (R222)
It is OK, but they would need to comply with the GNU licence and fully publish any changes they do.
Then, if they are using it for commercial purposes, they need to check they are not infringing on any patents etc.
Mike
Then, if they are using it for commercial purposes, they need to check they are not infringing on any patents etc.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Jumper T12 Multi FrskyX Not Available (R222)
Thanks Mike.. so, as far as I understand it is their problem, not yours.. Good
And also means that jumper radio owners could compile the firmware with the missing protocol, and flash it to their radios..
João
And also means that jumper radio owners could compile the firmware with the missing protocol, and flash it to their radios..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Jumper T12 Multi FrskyX Not Available (R222)
That's why I asked for the source but I fear it's just going to be another RC rabbit hole to spend way too much time in. OTOH running erskyTx on my T12 with FrSkyX receivers would be sweet.