Found ErSkyTX for Taranis Plus on DL page.
Tried to flash it onto my Plus thru Companion 2.2.3. Looked like it was working then said DONE!!
However, a reboot of the radio gave me the original OpenTX (flash didn't "take").
I assume I did something wrong??
Boowho??
erskyTX on Taranis Plus??
Re: erskyTX on Taranis Plus??
I now have erskyTX and it's bootloader flashed to my Taranis Plus.
I can enter maintenance mode and select "update module"
Is this the internal module or an external module, for example IRangeX 4 in 1.
Mike B...... If anyone knows the answer it should be you.
Thanks
boowho??
I can enter maintenance mode and select "update module"
Is this the internal module or an external module, for example IRangeX 4 in 1.
Mike B...... If anyone knows the answer it should be you.
Thanks
boowho??
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: erskyTX on Taranis Plus??
Please check what other options you have.
What version is displayed on the Version menu?
In maintenance mode you should see:
Update Bootloader
Update Int. XJT
Update Ext. SPort
Change SPort ID
Update XMEGA
Update Multi
Update Int. XJT is the internal module
Update Multi is a multi module in the external bay.
Mike
What version is displayed on the Version menu?
In maintenance mode you should see:
Update Bootloader
Update Int. XJT
Update Ext. SPort
Change SPort ID
Update XMEGA
Update Multi
Update Int. XJT is the internal module
Update Multi is a multi module in the external bay.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: erskyTX on Taranis Plus??
Bootloader : OTX 2.2.3
Firmware : er9xd-r221
Select update multi from maintenance menu and selected Multi-STM_TXFLASH_INV-v1.2.1.39.bin
get flash failed.
The modules own bootloader has never been installed on the IrangeX 4 in 1. Bangood yellow knob model. version 1.3 board
If/when I ever get the module flashed, I plan to re-install OpenTX.
Boowho??
Firmware : er9xd-r221
Select update multi from maintenance menu and selected Multi-STM_TXFLASH_INV-v1.2.1.39.bin
get flash failed.
The modules own bootloader has never been installed on the IrangeX 4 in 1. Bangood yellow knob model. version 1.3 board
If/when I ever get the module flashed, I plan to re-install OpenTX.
Boowho??
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: erskyTX on Taranis Plus??
To flash from the radio, you do need to have the bootloader installed on the module.
Does the module have a USB socket on it?
Mike
Does the module have a USB socket on it?
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!