erskyTX on Taranis Plus??

[boowho]

Found ErSkyTX for Taranis Plus on DL page.

Tried to flash it onto my Plus thru Companion 2.2.3. Looked like it was working then said DONE!!

However, a reboot of the radio gave me the original OpenTX (flash didn't "take").

I assume I did something wrong??

Boowho??

[boowho]

I now have erskyTX and it's bootloader flashed to my Taranis Plus.

I can enter maintenance mode and select "update module"

Is this the internal module or an external module, for example IRangeX 4 in 1.

Mike B...... If anyone knows the answer it should be you.

Thanks

boowho??

[MikeB]

Please check what other options you have.
What version is displayed on the Version menu?
In maintenance mode you should see:
Update Bootloader
Update Int. XJT
Update Ext. SPort
Change SPort ID
Update XMEGA
Update Multi

Update Int. XJT is the internal module
Update Multi is a multi module in the external bay.

Mike

[boowho]

Bootloader : OTX 2.2.3

Firmware : er9xd-r221

Select update multi from maintenance menu and selected Multi-STM_TXFLASH_INV-v1.2.1.39.bin
get flash failed.

The modules own bootloader has never been installed on the IrangeX 4 in 1. Bangood yellow knob model. version 1.3 board

If/when I ever get the module flashed, I plan to re-install OpenTX.

Boowho??

[MikeB]

To flash from the radio, you do need to have the bootloader installed on the module.
Does the module have a USB socket on it?

Mike

[boowho]

To flash from the radio, you do need to have the bootloader installed on the module.
Does the module have a USB socket on it?

Mike

Yes it does. I've order the items I need to flash a bootloader to the module.

Thank you, Mike.