I ordered the EU X8R receiver by accident and I have a XJT I got in the USA with a 9Xtreme Turnigy 9X running the latest ersky9x. Is it just as easy as using a regular Taranis to flash the receiver to the USA firmware? Is it even needed, like... will the EU receiver just work out of the box and I shouldn't have to worry?
Sorry for noob questions like this... thanks.
Possible to flash FrSky receiver with ersky9x?
-
- Posts: 29
- Joined: Sat Jan 26, 2013 5:35 pm
- Country: Spain
-
- Posts: 29
- Joined: Sat Jan 26, 2013 5:35 pm
- Country: Spain
Re: Possible to flash FrSky receiver with ersky9x?
So self help... this guide will work the same with a 9Xtreme 9X that has the black FrSky wire soldered to pin#5 on the back 9X board which is the only mod you need to do for smartport telemetry. I have a nimh battery that usually sits over 10v so I spent the $10 to order the FTDI and some jumper wires. Will be handy to make sure all the receivers I get have the latest firmware flashed.
https://youtu.be/ItjC54M9sN0
https://youtu.be/ItjC54M9sN0