ErskyTx on X20

erskyTx runs on many radios and upgrade boards
ersky9x was a port of er9x for use on the sky9x board.
Ramchand
Posts: 6
Joined: Wed Mar 02, 2022 3:24 pm
Country: -

Re: ErskyTx on X20

Post by Ramchand » Thu Mar 31, 2022 2:51 pm

pliggett wrote:
Thu Mar 31, 2022 12:55 am
I keep getting the error 'composite.bin' not fully written. once at 270336 and the 2nd at 285771
I have tried different versions of Ethos firmware and different SD cards with the same result.

My radio is currently suffering from the low RTC battery issue caused by the old firmware.

Can a low RTC battery cause this failure? If not, any clue as to what is happening?
factory sd card that came with the radio works well. i had same issue when using other sd cards


pliggett
Posts: 4
Joined: Thu Mar 31, 2022 12:51 am
Country: -

Re: ErskyTx on X20

Post by pliggett » Thu Mar 31, 2022 4:21 pm

I tried both a factory card and a 32gig class 10 card with the same result for both of them.

User avatar
MikeB
9x Developer
Posts: 17712
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx on X20

Post by MikeB » Thu Mar 31, 2022 7:42 pm

I've posted a new test version (P4r8) that includes error recovery when creating the composite file. I tested the composite creation several times, but it never went wrong so didn't test the recovery!

Please try this. If you still get a failure, please report all values then shown on the screen.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

pliggett
Posts: 4
Joined: Thu Mar 31, 2022 12:51 am
Country: -

Re: ErskyTx on X20

Post by pliggett » Fri Apr 01, 2022 1:18 pm

MikeB wrote:
Thu Mar 31, 2022 7:42 pm
I've posted a new test version (P4r8) that includes error recovery when creating the composite file. I tested the composite creation several times, but it never went wrong so didn't test the recovery!

Please try this. If you still get a failure, please report all values then shown on the screen.

Mike
Mike,
I will try tonight when I get home.

Thanks

pliggett
Posts: 4
Joined: Thu Mar 31, 2022 12:51 am
Country: -

Re: ErskyTx on X20

Post by pliggett » Sat Apr 02, 2022 12:14 am

MikeB wrote:
Thu Mar 31, 2022 7:42 pm
I've posted a new test version (P4r8) that includes error recovery when creating the composite file. I tested the composite creation several times, but it never went wrong so didn't test the recovery!

Please try this. If you still get a failure, please report all values then shown on the screen.

Mike
Mike,
It failed on me until I used a new extreme speed microSD card. Got it working now.


User avatar
MikeB
9x Developer
Posts: 17712
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx on X20

Post by MikeB » Sat Apr 02, 2022 9:25 am

Please could you try a card that fails again and then let me know the extra values showing near the bottom of the screen.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
MikeB
9x Developer
Posts: 17712
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx on X20

Post by MikeB » Sat Apr 09, 2022 4:59 pm

I've posted r8. This fixes a number of bugs, and adds quite a few missing menu entries. Some warnings are also now included (throttle and switch at power on or model select, Receiver warning at power off or model select).
Fix mix sources and mix switch bugs
Add Receiver warning on power off and select model
Add throttle warning
Add model name voice
Add music menu
Add switch warning
Add instant trim
Add telemetry reset(s)
Add help text
Several items added to model|general and model|telemetry menus
Several items added to radio|alarms and radio|general menus
Custom "welcome" message may be set
More telemetry processing

The r8 .zip file also includes a file "helptel.txt". Place this file in the root of the SD card. It is used to put a description on the bottom line of screens that display an array of values to from which to choose one.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Ramchand
Posts: 6
Joined: Wed Mar 02, 2022 3:24 pm
Country: -

Re: ErskyTx on X20

Post by Ramchand » Tue Apr 12, 2022 9:26 pm

Hi Mike,
Is the erskytx ready to use elrs lua yet?

User avatar
MikeB
9x Developer
Posts: 17712
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx on X20

Post by MikeB » Tue Apr 12, 2022 11:16 pm

I haven't got LUA running on the X20 yet. BASIC scripts are running and I've attached the script I have for ELRS_V2. I'm still learning what the script needs to do so it isn't 100%, but most things are working in some fashion.

Mike
Attachments
ELRSv2.zip
(3.63 KiB) Downloaded 40 times
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

leon20008
Posts: 2
Joined: Tue Apr 26, 2022 11:42 am
Country: -

Re: ErskyTx on X20

Post by leon20008 » Wed Apr 27, 2022 3:29 am

Hi Mike,
I flashed x20s and don't understand why not work run script(i tryed all script - nothing).
video

User avatar
MikeB
9x Developer
Posts: 17712
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx on X20

Post by MikeB » Wed Apr 27, 2022 9:13 am

I have a bit of a bug there! You need to use a long press of the ENTER (encoder) button to run a script, but this may be being actioned as the EXIT function (RTN button), and so does that instead.
Short term workaround is to disable the EXIT function of a long press of the ENTER button. Go to the RADIO SETUP|General menu and tick "No ENC. as exit", this will disable the ENTER button from working as EXIT.
I currently have this ticked, so didn't notice it was causing a problem.
I'm not sure why I chose to need a long press of the ENTER button to run a script!

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

leon20008
Posts: 2
Joined: Tue Apr 26, 2022 11:42 am
Country: -

Re: ErskyTx on X20

Post by leon20008 » Wed Apr 27, 2022 11:24 am

MikeB wrote:
Wed Apr 27, 2022 9:13 am
Short term workaround is to disable the EXIT function of a long press of the ENTER button. Go to the RADIO SETUP|General menu and tick "No ENC. as exit", this will disable the ENTER button from working as EXIT.
Mike
Thanks, you this is solved my troubles 8-) Scripts begin working.

User avatar
MikeB
9x Developer
Posts: 17712
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx on X20

Post by MikeB » Thu May 05, 2022 9:38 pm

I've just posted "r9".
A short press of the ENTER button will now run a script (as well as a long press if "No ENC. as exit" is ticked.
Separate trims in flight modes wasn't working properly, this is now fixed.
Fading between flight modes is now also implemented.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!


Post Reply

Return to “erskyTx (was ersky9x)”