ERSKYTx (was ersky9x) Questions

erskyTx runs on many radios and upgrade boards
ersky9x was a port of er9x for use on the sky9x board.
yds
Posts: 8
Joined: Fri Apr 10, 2020 6:38 pm
Country: United States
Location: Dirtee Jerzee

Re: ERSKYTx (was ersky9x) Questions

Post by yds » Sun May 02, 2021 5:03 pm

Mike, a typical ExpressLRS TX module looks like this Image Image
the S, VBAT and GND near the word "Super" go to the apropos pins of the external bay interface.. now with your builds such modules could be used with the internal interface.. for full functionality a replacement module would need to pass through the pinout for an external module, but for testing and/or ExpressLRS only, radios could use one of the existing designs like that NuclearQuads SuperSlim TX hooked up to the internal module pinout.


User avatar
jhsa
Posts: 19441
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ERSKYTx (was ersky9x) Questions

Post by jhsa » Sun May 02, 2021 6:42 pm

Long range with ESP32? :o :o ;) Or what does LRS mean? ;) :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

anzeek
Posts: 6
Joined: Sat May 01, 2021 4:02 pm
Country: -

Re: ERSKYTx (was ersky9x) Questions

Post by anzeek » Sun May 02, 2021 7:09 pm

MikeB wrote:
Sun May 02, 2021 4:08 pm
The SPort signal is on pin 10 of the connector to the RF board.
so just to be sure we are talking about the same pin :?
https://ibb.co/QCJnnQY

anzeek
Posts: 6
Joined: Sat May 01, 2021 4:02 pm
Country: -

Re: ERSKYTx (was ersky9x) Questions

Post by anzeek » Sun May 02, 2021 7:15 pm

jhsa wrote:
Sun May 02, 2021 6:42 pm
Long range with ESP32? :o :o ;) Or what does LRS mean? ;) :)

João
esp is the brain of this board the rf chip is a lora sx1280 ic packaged in E28-2G4M27S module

User avatar
jhsa
Posts: 19441
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ERSKYTx (was ersky9x) Questions

Post by jhsa » Sun May 02, 2021 7:36 pm

Ahh, ok, thanks.. :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW


User avatar
MikeB
9x Developer
Posts: 17464
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ERSKYTx (was ersky9x) Questions

Post by MikeB » Sun May 02, 2021 8:41 pm

anzeek wrote:
Sun May 02, 2021 7:09 pm
MikeB wrote:
Sun May 02, 2021 4:08 pm
The SPort signal is on pin 10 of the connector to the RF board.
so just to be sure we are talking about the same pin :?
Yes, that looks to be correct. (When I followed your link my antivirus blocked a malicious download!).

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

anzeek
Posts: 6
Joined: Sat May 01, 2021 4:02 pm
Country: -

Re: ERSKYTx (was ersky9x) Questions

Post by anzeek » Sun May 02, 2021 8:58 pm

MikeB wrote:
Sun May 02, 2021 8:41 pm
Yes, that looks to be correct. (When I followed your link my antivirus blocked a malicious download!).

Mike
ou i just used the first image sharing i could find on google.
so you were able to see the picture? i re uploaded it to imgur
https://imgur.com/a/DJLJpwN
thanks i will update the pcb so it expects a sport signal on that pin :)

User avatar
MikeB
9x Developer
Posts: 17464
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ERSKYTx (was ersky9x) Questions

Post by MikeB » Sun May 02, 2021 10:27 pm

Yes, I saw the picture OK.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!


Post Reply

Return to “erskyTx (was ersky9x)”