Review of Redcat Racing GEN8 Scout II, 1/10, Crawler

Want to ask about that much needed test equipment? Looking for something new? Check in here!
Post Reply
User avatar
bob195558
Posts: 2232
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Review of Redcat Racing GEN8 Scout II, 1/10, Crawler

Post by bob195558 » Wed May 20, 2020 1:42 pm

RC Scout II Generation 8, 1/10, Crawler, Redcat Racing
RC Scout II_K.jpg
This Scout II can be a lot of fun when going on walks that are even over rough terrain.
Able to craw over most things that are no higher then the bottom of the bumpers.
Using a LiPo 2S 6200mAh battery that last a very long time.
The Radio receiver looks to be the same as a Flysky.
The Redcat basic radio functions are very limited, so I am thinking of converting
one of my 9x Radio's to give me a lot more functions and control.

RC Scout II_h.jpg

Specs
Motor Type: 17T RC550 Brushed Motor
Transmission: Forward & Reverse
Drive System: 4 Wheel Drive
Length: 571mm
Width: 249mm
Height: 258mm
Dry Weight: 6.9 LBS (3130 grams)
Wheelbase: 324mm Stock (312-336mm Adjustable)
Ground Clearance: 73mm
Chassis Type: 1.5mm Thick C-Channel Frame Rails
Shocks: Aluminum Body Oil Filled Shocks
Speed Controller: 40a Brushed Waterproof ESC
Battery: Is not included, but I am using a LiPo 2S 6200mAh
Radio System: 2.4GHz Radio System
View more info here: https://www.rcplanet.com/redcat-racing- ... en8-scout/

RC Scout II_e.jpg
RC Scout II_c.jpg
RC Scout II_b.jpg
RC Scout II_m.jpg
RC Scout II_o.jpg
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).


Post Reply

Return to “Reviews”