openrcforums

Hi FOlks, i just got my 9xr and im setting up my helicopter. I need a throttle hold curve for autos but the standard 9xr heli template doesnt have it. I have searched around but the info seems quite sparse. This is what i have done so far.

This mix on channel 11 after ID0, ID1 and ID2

+100%
THR
noTrim
Curve(C7)
Switch(THR)

It does kind of work but the curve is way different from a standard curve. Any help would be appreciated. Oh and im just waiting on my usb programmer and im going to put either er9x or opentx on my radio, is one of these firmwares better for helicopters than the other.

thank you

Graham

On my heli setups I use a linear curve or -100 to 100. So I don't have a separate curve for it. I am usually in an idle up mode when I fly. Don't forget to use replace on that mixer line, and make sure you set curve c7 to what you want.
-Gohst

Sent from my LG-P999 using Tapatalk 2

thanks changing it to replace done the trick.

Graham