iKon gyro (ms brain)

Post Reply
michaelgriffin
Posts: 13
Joined: Fri Aug 03, 2012 1:25 am
Country: -

iKon gyro (ms brain)

Post by michaelgriffin » Sun May 19, 2013 1:16 am

Late 2012, I asked for, and received help on this forum getting my T-Rex 500 DFC set-up with the ER9X radio system and the Micro-beast gyro.
Everything went great with that project, and my Micro-beast is now on my T-Rex 250 with my ER9X (working great).

Now, I'm trying to install the iKon FBL Gyro on my T-Rex 500 with the ER9X TX/RX. Certainly somebody has a similar model programmed, that I can at least start with. This programming is pretty confusing to me, but I know it can be done.

Thanks

Mike


User avatar
gohsthb
Posts: 1412
Joined: Wed Dec 28, 2011 2:32 pm
Country: -
Location: Naperville, IL

Re: iKon gyro (ms brain)

Post by gohsthb » Sun May 19, 2013 4:23 am

radio wise it should be the same programming as your beast. Follow the manual for the ikon, and you should be all set. I have a friend that recently got an ikon, unfortunately his died before he could fly it though.
-Gohst

Sent from my LG-P999 using Tapatalk 2

michaelgriffin
Posts: 13
Joined: Fri Aug 03, 2012 1:25 am
Country: -

Re: iKon gyro (ms brain)

Post by michaelgriffin » Sun May 19, 2013 4:39 am

It is basically the same, but the iKon has 'bank switching'. Apparently, after programming the three different banks, you switch from one bank to another with the 3 position switch. I'll also need throttle cut, throttle curves, and pitch curves. I'm trying to get it set up so that ID0 = bank one (iKon) and Thr. curve c1. ID1 = bank 2 etc...


Post Reply

Return to “Helicoptor Programming”