mcpx setup??

Post Reply
EJ1208
Posts: 1
Joined: Wed Jan 09, 2013 11:01 pm
Country: -

mcpx setup??

Post by EJ1208 » Wed Jan 09, 2013 11:16 pm

hey im realy having a problem settingup my mcpx with er9x.i used a template infound on here. i want the throttle on left stick? how do i do this and how do i setup throttle hold. im new to er9x, all i need is info on the setup for mcpx?? thanks guys


User avatar
rperkins
Posts: 1422
Joined: Sun Jan 08, 2012 12:51 pm
Country: -

Re: mcpx setup??

Post by rperkins » Thu Jan 10, 2013 12:00 am

Hi and welcome. Ya didnt mention which template you tried. Here is mine. I am no expert on all things er9x, but it works.
viewtopic.php?f=38&t=450#p27733

Ya say you want the throttle on the left. That is what I have. I take it you bought a mode2 radio.

Throttle hold works. The only difference is that the blue led does not flash on the MCPX 3in1 board while in throttle.
hold. I wish it did. Maybe someday I'll research that.

Good luck

Post Reply

Return to “Helicoptor Programming”