X4r 4Ch flash to s-port

Love the 9x? Use FRSky? Post your questions and answers here!
Post Reply
nick9one1
Posts: 1
Joined: Sat Aug 10, 2019 2:49 pm
Country: -

X4r 4Ch flash to s-port

Post by nick9one1 »

I have an X4R 4Ch module (the one without sbus).

Is it possible to flash this and get sbus?

It looks like there are only 2 firmwares available, EU and non-EU?

Pictures of the two versions
Image
Image

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: X4r 4Ch flash to s-port

Post by Kilrah »

They both run the same firmware, the difference is done in hardware by the placement of a 0-Ohm resistor on the board (the connector pin for CH4 either connects to the SBUS signal or the CH4 one). If you're able to solder very small things you can change it.
Post Reply

Return to “The FRSKY Forum”