Proportional Beeping

er9x is the best known firmware. It has a superb range of features and is well supported by the community. Well worth trying out.
Post Reply
wallaguest1
Posts: 121
Joined: Mon Jan 02, 2012 9:56 am
Country: -

Proportional Beeping

Post by wallaguest1 »

hi, i tried to make a mix in order to get a beep each time a channel is triggered.
and i mixed this channel so it trigger itself in a proportional speed,
if THR is in a low position then it trigger slow, if its in high position then it trigger quick, its proportional

the main problem is the beeping is not proportional, it just beep once a few seconds,

is there any way to get a proportional beep to know just by sound how high/low is the stick position?
or due the way "beeps" are programmed this is impossible ?

thnks
Last edited by wallaguest1 on Thu May 31, 2012 2:33 am, edited 1 time in total.

User avatar
Rob Thomson
Site Admin
Posts: 4543
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

Proportional Beeping

Post by Rob Thomson »

I don't belie e there are any functions in the system open9x/er9x to set the beep length like this!


---
I am here: http://tapatalk.com/map.php?xnm4ez
Sent from my iPhone using Tapatalk
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
wallaguest1
Posts: 121
Joined: Mon Jan 02, 2012 9:56 am
Country: -

Re: Proportional Beeping

Post by wallaguest1 »

first time i see something i can't do with er9x ;P
User avatar
Rob Thomson
Site Admin
Posts: 4543
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

Proportional Beeping

Post by Rob Thomson »

I will see what can be done to get a feature into open9x to do this.

Will be a bit harder in er9x as their is no function in place to configure this!

Although... I have not tried mikes laters version so may be wrong :)


Sent from my iPhone using Tapatalk
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
wallaguest1
Posts: 121
Joined: Mon Jan 02, 2012 9:56 am
Country: -

Re: Proportional Beeping

Post by wallaguest1 »

thnks!

bertrand35
9x Developer
Posts: 2764
Joined: Fri Dec 30, 2011 11:11 pm
Country: -

Re: Proportional Beeping

Post by bertrand35 »

I just have created a "playchannel" branch in open9x for this feature. For the moment, the function only calls the playVario(channel value). I don't know what would be needed? A variable frequency? A variable length? Both?

Bertrand.
wallaguest1
Posts: 121
Joined: Mon Jan 02, 2012 9:56 am
Country: -

Re: Proportional Beeping

Post by wallaguest1 »

hi,
the idea was have some kind of short beep able to be played very quickly,


i guess variable frequency will be useful just for those people with a speaker mod in the radio, so no needed, neither a variable length, as the length will be fixed but repeated very quickly commanded by a self triggered switch.
Just like a mix for a strobe light, but for a beep.

let me show you the idea with an eepe
--
RUD Switch activate the mix.
ch14 is configured to play a beep each time its triggered, and when the mix is active, ch14 trigger itself in a proportional speed based in the THR stick position.
--
CH15/C16 are just for the mixing purpose

hope that helps
Attachments
varithr beep.eepe
(1.29 KiB) Downloaded 288 times

Post Reply

Return to “er9x”