Audio (voice) - Stock 9X PCB

er9x is the best known firmware. It has a superb range of features and is well supported by the community. Well worth trying out.
User avatar
jhsa
Posts: 19021
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Audio (voice) - Stock 9X PCB

Post by jhsa » Tue Apr 23, 2013 8:37 am

Ahhh, yes, didn't read about the 00:00 somehow..
My radio does the same. Timer counts up on the screen but voice counts down starting at 255 minutes..
I guess it should count up starting the announcements at 1 minute..

João

@ReSt
I think the timer should be allowed to count up without a target value.. and the voice say it correctly.. ;)
Some people just want to know how long they flew. Gliders or people with IC powered aircraft.
On my club for example, if we fly IC powered aircraft, we must log the engine running time of every flight in a log book.
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW


User avatar
MikeB
9x Developer
Posts: 16609
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Audio (voice) - Stock 9X PCB

Post by MikeB » Tue Apr 23, 2013 9:01 am

I can see why there is a problem. The timer implementation is odd. The actual timer always counts in one direction, then the value displayed/used is modified depending on the direction and set time. When we only had a minute beep, the actual value didn't matter, now, for voice, it does.

I've only ever actually used a down counter when flying. I'll get to this soon, but I have a chance to do some FLYING today.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
jhsa
Posts: 19021
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Audio (voice) - Stock 9X PCB

Post by jhsa » Tue Apr 23, 2013 9:09 am

Yeah, go for it Mike.. Have fun.. here the weather is c``p again today.. :(

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
MikeB
9x Developer
Posts: 16609
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Audio (voice) - Stock 9X PCB

Post by MikeB » Wed Apr 24, 2013 9:18 am

On the circuit as I designed it, there are THREE unused inputs (labelled X1, X2 and X3), on pins PC3, PC2 and PC1.
These could be used as extra switch inputs, if we can get the data to the M64.
Are these inputs easily connectable on the HC1969 Megasound board?

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
jhsa
Posts: 19021
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Audio (voice) - Stock 9X PCB

Post by jhsa » Wed Apr 24, 2013 9:38 am

I would say that another 3POS switch would be very welcome as well as another momentary on the other side/back of the radio..

Thanks Mike

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW


User avatar
HC1969
Posts: 421
Joined: Wed Dec 28, 2011 8:47 am
Country: Hungary
Location: Istvan Magi
Contact:

Re: Audio (voice) - Stock 9X PCB

Post by HC1969 » Wed Apr 24, 2013 10:22 am

MikeB wrote:On the circuit as I designed it, there are THREE unused inputs (labelled X1, X2 and X3), on pins PC3, PC2 and PC1.
These could be used as extra switch inputs, if we can get the data to the M64.
Are these inputs easily connectable on the HC1969 Megasound board?

Mike.
My card is based on the HaGeHa card.
Does not appear in X1, X2 and X3 inputs.
These treats M328P the original program?
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!

User avatar
jhsa
Posts: 19021
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Audio (voice) - Stock 9X PCB

Post by jhsa » Wed Apr 24, 2013 10:28 am

well, it looks like that everybody will have to do a little soldering if we want the extra switches ;)
But if I remember the latest HaGeHa board has pads on those pins??

EDIT: Yes it does.. I just confirmed..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
HC1969
Posts: 421
Joined: Wed Dec 28, 2011 8:47 am
Country: Hungary
Location: Istvan Magi
Contact:

Re: Audio (voice) - Stock 9X PCB

Post by HC1969 » Wed Apr 24, 2013 10:52 am

jhsa wrote:well, it looks like that everybody will have to do a little soldering if we want the extra switches ;)
But if I remember the latest HaGeHa board has pads on those pins??

EDIT: Yes it does.. I just confirmed..

João
Where? Please show me this!
http://amod328.googlecode.com/svn/hardw ... IC-DIL.pdf
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!

User avatar
jhsa
Posts: 19021
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Audio (voice) - Stock 9X PCB

Post by jhsa » Wed Apr 24, 2013 10:55 am

Pins 24, 25 and 26..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
HC1969
Posts: 421
Joined: Wed Dec 28, 2011 8:47 am
Country: Hungary
Location: Istvan Magi
Contact:

Re: Audio (voice) - Stock 9X PCB

Post by HC1969 » Wed Apr 24, 2013 11:03 am

jhsa wrote:Pins 24, 25 and 26..
Thanks!
The diagram was not shown.
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!

User avatar
HC1969
Posts: 421
Joined: Wed Dec 28, 2011 8:47 am
Country: Hungary
Location: Istvan Magi
Contact:

Re: Audio (voice) - Stock 9X PCB

Post by HC1969 » Wed Apr 24, 2013 11:09 am

3 pins= 1pcs 3 way svitch + 1pcs 1way switch!
or
1pcs 7 way switch!
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!

User avatar
LTMNO
Posts: 1049
Joined: Fri Nov 30, 2012 9:31 pm
Country: Canada
Location: Toronto, Canada

Re: Audio (voice) - Stock 9X PCB

Post by LTMNO » Thu Apr 25, 2013 10:27 pm

jhsa wrote:I would say that another 3POS switch would be very welcome as well as another momentary on the other side/back of the radio..

Thanks Mike

João
Hello Gents, yes, 3 Pos Switch is always a blessing. ;-)
Custom 9x with M64/Telemetry Mod

User avatar
jhsa
Posts: 19021
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Audio (voice) - Stock 9X PCB

Post by jhsa » Thu Apr 25, 2013 11:20 pm

LTMNO wrote: Hello Gents, yes, 3 Pos Switch is always a blessing. ;-)
AMEN Brother :mrgreen: :mrgreen:
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
Moska
Posts: 55
Joined: Wed Nov 28, 2012 3:05 pm
Country: -

Re: Audio (voice) - Stock 9X PCB

Post by Moska » Mon Apr 29, 2013 12:33 am

Thank you Mike,

This last update is working perfectly and have nice features!!! :D :D :D

User avatar
ShowMaster
Posts: 4327
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: Audio (voice) - Stock 9X PCB

Post by ShowMaster » Mon Apr 29, 2013 9:27 pm

Is there a posted schematic of the megasound board?



Sent from my iPod touch using Tapatalk.

User avatar
Kilrah
Posts: 10271
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Audio (voice) - Stock 9X PCB

Post by Kilrah » Mon Apr 29, 2013 9:29 pm

HC1969 wrote:My card is based on the HaGeHa card.

User avatar
jhsa
Posts: 19021
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Audio (voice) - Stock 9X PCB

Post by jhsa » Mon Apr 29, 2013 10:33 pm

My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

hageha
Posts: 213
Joined: Tue Dec 27, 2011 9:25 pm
Country: -
Location: Hildesheim

Re: Audio (voice) - Stock 9X PCB

Post by hageha » Tue Apr 30, 2013 1:42 pm

The latest data from Feb.03.2013 are here:
http://openrcforums.com/forum/viewtopic ... start=3081

User avatar
mhotar
Posts: 198
Joined: Wed May 16, 2012 9:57 pm
Country: -
Location: Jemnice, Vysocina

Re: Audio (voice) - Stock 9X PCB

Post by mhotar » Wed May 01, 2013 10:12 pm

Hi All,
I build this wonderfull sound module into 9XR, here are some pictures.
Many thanks to all involved on its design !
I can share board layout (DIL/SMD0805) if any interest.
DSCF0490.JPG
DSCF0493.JPG
DSCF0495.JPG
DSCF0460.JPG
DSCF0471.JPG

hageha
Posts: 213
Joined: Tue Dec 27, 2011 9:25 pm
Country: -
Location: Hildesheim

Re: Audio (voice) - Stock 9X PCB

Post by hageha » Thu May 02, 2013 2:03 pm

hi mhotar,
what are the dimensions of the board?
The 5 volts stabilization is no longer available?
The motherboard 5V regulator is strong enough!
Hans

User avatar
jhsa
Posts: 19021
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Audio (voice) - Stock 9X PCB

Post by jhsa » Thu May 02, 2013 3:59 pm

The 9xR has a stronger 5V regulator..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
mhotar
Posts: 198
Joined: Wed May 16, 2012 9:57 pm
Country: -
Location: Jemnice, Vysocina

Re: Audio (voice) - Stock 9X PCB

Post by mhotar » Thu May 02, 2013 7:22 pm

Dimensions are 33x43, there is 5V and 3.3V regulator on the board, 3.3V is hidden under blue cable on the pictures.
AudiomegaXRv2.zip
(3.26 MiB) Downloaded 190 times

User avatar
MikeB
9x Developer
Posts: 16609
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Audio (voice) - Stock 9X PCB

Post by MikeB » Fri May 03, 2013 3:49 pm

I've just allocated voice file 0059.WAV for the word "Watts".

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
Wrongway
Posts: 23
Joined: Tue Nov 13, 2012 12:15 am
Country: United States
Location: Kansas USA

Re: Audio (voice) - Stock 9X PCB

Post by Wrongway » Fri May 03, 2013 11:39 pm

Hi Guys,

Soldering the wires to D0,D1,D2,D3 was not so bad after getting a good magnafier! :shock:
A sign of old age?? I am using the MegaSound board.
JHSA made me a file "hay darrell are you ready to fly". Thanks JHSA,, Am I correct that I read that I need to rename this file to 0028 to have it play when the radio is turned on?
What is a good program to use when you want to open and edit
a HEX or BIN file?

Thank You,
Wrongway

User avatar
jhsa
Posts: 19021
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Audio (voice) - Stock 9X PCB

Post by jhsa » Fri May 03, 2013 11:53 pm

Wrongway wrote:Am I correct that I read that I need to rename this file to 0028 to have it play when the radio is turned on?
If you use er9x, yes..
What is a good program to use when you want to open and edit
a HEX or BIN file?
I don't know if I undrstand what you mean here :?

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
jhsa
Posts: 19021
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Audio (voice) - Stock 9X PCB

Post by jhsa » Sat May 04, 2013 12:00 am

MikeB wrote:I've just allocated voice file 0059.WAV for the word "Watts".

Mike.
Will update my sound files as soon as possible.. Shame that I can't update my own SD Card at the moment. The SD Card is under the board and I can't acess it. Board is hot glued to the case, so to update my card would have to remove the megasound9x board from the radio, which I'm not going to do after the work I had to fit all in ;)
My only option is to wait for the voice module to be able to comunicate to the PC over serial..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

Clivew
Posts: 338
Joined: Tue Dec 27, 2011 8:08 pm
Country: -
Location: Stroud, Glos, England

Re: Audio (voice) - Stock 9X PCB

Post by Clivew » Sat May 04, 2013 12:23 am

:roll: :P
It's not really funny at all :P
Apologies João, my warped sense of humour!

Clive

User avatar
LTMNO
Posts: 1049
Joined: Fri Nov 30, 2012 9:31 pm
Country: Canada
Location: Toronto, Canada

Re: Audio (voice) - Stock 9X PCB

Post by LTMNO » Sat May 04, 2013 1:10 am

jhsa wrote:
MikeB wrote:I've just allocated voice file 0059.WAV for the word "Watts".

Mike.
Will update my sound files as soon as possible.. Shame that I can't update my own SD Card at the moment. The SD Card is under the board and I can't acess it. Board is hot glued to the case, so to update my card would have to remove the megasound9x board from the radio, which I'm not going to do after the work I had to fit all in ;)
My only option is to wait for the voice module to be able to comunicate to the PC over serial..

João

Lol, me too. ;-) Hello Amigo.
Custom 9x with M64/Telemetry Mod

User avatar
LTMNO
Posts: 1049
Joined: Fri Nov 30, 2012 9:31 pm
Country: Canada
Location: Toronto, Canada

Re: Audio (voice) - Stock 9X PCB

Post by LTMNO » Sat May 04, 2013 1:15 am

BTW, Great job mho tar, that is some nice PCB'ing...
Custom 9x with M64/Telemetry Mod

User avatar
HC1969
Posts: 421
Joined: Wed Dec 28, 2011 8:47 am
Country: Hungary
Location: Istvan Magi
Contact:

Re: Audio (voice) - Stock 9X PCB

Post by HC1969 » Sat May 04, 2013 6:43 am

It would be good to have a centrally stored and updated, always up voice table because I'm not sure I follow the updates (and for me, there are things you need to put extra sounds in the blanks)!
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!


Post Reply

Return to “er9x”