Audio (voice) - Stock 9X PCB

[thechannelmaster]

[Wrongway]

Hi Guys,

To jhsa, Yes the jig idea is great! If all moves together, then no worries! I quit smoking about a year ago and shake alot less too. Yes them processor pins would be fun!

Flaps 30,
Thanks for your kind offer! The Airfare and Hotel is no problem at all but if your like me, the bar bill could
get expensive! ;0)

[HC1969]

i got this from megasound9x and i can not get it to speak the back light works just fine but know speech and i have email mega sound over and over to see if i got it wire right .i got nothing on how to hook it up .can somebody here help me . i have add the stuff megasound sent me now how in the hell would i know how to wire this thing up i need pic s plz lot of help iout

The attachment $(KGrHqVHJE!FDzyd5HPbBRC6rlc9oQ~~60_3.JPG is no longer available

The attachment Voice.pdf is no longer available

Connection schema:

Connections:
Akku = Vcc (Akku +)
GND = negativ
D0, D1, D2, D3, D7 = Data line

The module is very sensitive to SD card!
Use branded SD card, up to 2GB!
SD format: FAT16 (not use other format)!
Voice type: 8 bit, 16kHz, mono, wav
Voice place: root of SD card!

These letters are sent.

[jhsa]

i got this from megasound9x and i can not get it to speak the back light works just fine

Did you get the board that is in that picture? That is not a MegaSound board, I'm sorry.. That is the old design that used the emartee module, and the blue module in there is not even the one we used. Can you post a link to what you bought??

João

[HC1969]

This is my old module. Above, I write how to wire.

[jhsa]

Ahhhh, ok..
then, pease check the LCD lines and try other SD cards.. I use cheap ones and they just worked..

[thechannelmaster]

yea i think i found the problem i hook the power + at the switch and maybe i have cook it thanks for the help hc1969 i guess i be getting another from you lol

[MikeB]

The board does have its own regulators, so should be OK. If the backlight is working, from the sound board, then your connections are likely to be OK.
Most likely is the SD card you are using, don't use one that is more than 2GB capacity.

Mike.

[jhsa]

yeah, connecting the power at the switch won't cook it, and as Mike said, if the backlight is working that means the connections are ok.. Changing the SD Card is also my bet.. Which Sound Pack are you using?
Try the one attached to the post on this link.

http://openrcforums.com/forum/viewtopic.php?f=64&t=1290

João

[thechannelmaster]

i found a 1gb sd and use the sound pack now it works perfect thanks for all the help

[jhsa]

Great that you got it working..

João

[Oliver]

Hi Everyone,

I just bought a MegaSound board from ebay.
My problem is that to solder the wires on the radio at points D0,1,2,3
looks very difficult for my old eyes, looking for someone here in the states
that could do those connections for me?

Thanks,
Darrell

Fut*ba ? I don't need no stinkin Fut*ba!

Hello. If I don't mistake, there are pads on the other side of the main board, that connected to the needed LCD lines. In my radio it now under the black foam (for backlight). If someone can do it - check it.

[HC1969]

The MegaSound 9X currently out of stock. Indicates, once again, will be available.
Please be patient.

[HC1969]

You operate the simulator port?
We do not go after the conversion (but I think do not the sound card because instead of FW)!

[isvedic]

Hi, I have Megasound 9X and audio and haptic mod (http://openrcforums.com/wiki/index.php/ ... ModAlt.jpg).

Where do I connect Bp (9)? Can I leave haptic mod, just need to remove buzzer ?

[HC1969]

BP port = Beeper transistor Base pin in TX main board.
Please see picture:
http://www.file.emiter.hu/file/Modellez ... ekot_n.jpg

[isvedic]

BP port = Beeper transistor Base pin in TX main board.
Please see picture:
http://www.file.emiter.hu/file/Modellez ... ekot_n.jpg

Seems we misunderstood, I would like to leave haptic mod if possible, and I have cut trace going to transistor for beeper signal. Is it possible to have haptic and voice mod?

[HC1969]

Yes! Where the original sound comes out in Haptic mode? You need to connect to the BP port!

[isvedic]

I connected it like this:

I hear beeps from keypress, but seems haptic is not working.

any suggestion?

[HC1969]

What use setup?

[isvedic]

What use setup?

Can you please explain what you mean with: What use setup?

[HC1969]

What use setup?

Can you please explain what you mean with: What use setup?

Please see my webpage for all info and setup screen (bat there is no haptic setup).

[Oliver]

Hello, frends.
Do anyone use LTMNO's .bat file for flashing voice module?
There is avrdude's .conf file in archive. And chip signatures for '328 and '328P are not the same as in datasheet, isn't it?

[isvedic]

Hi,

I'm enjoying my new voice spoken tgy 9x, but wanted to expand voice library. Do anybody have any suggestion for female speech synthesizer that outputs to 22kHz 16bit?

[ReSt]

Try this

http://www2.research.att.com/~ttsweb/tts/demo.php/

Reinhard

[isvedic]

Try this

http://www2.research.att.com/~ttsweb/tts/demo.php/

Reinhard

Already tried, do not play, it's 18kHz. Not sure if that affects playing.

[LTMNO]

Hello, frends.
Do anyone use LTMNO's .bat file for flashing voice module?
There is avrdude's .conf file in archive. And chip signatures for '328 and '328P are not the same as in datasheet, isn't it?

Hello Oliver,
hope all is well.... what is the question?
if you are referring to the Archive of the Bat with the CONF. that file has the replica of 328 for 328P with different signature so that the AVRDUDE will not throw an error in case you don't force with '-f'.

It works great for both 328 and 328P.

I hope that answered your question?

Sorry for translation.

[jhsa]

Guys, unfortunately people don't read the threads completely and keep buying the voice module from emartee. we know that is not good..
So, my suggestion is to remove the links for the board and if people want that board we could put instead a link to Thomas9x's site.. I think it's him that has some chips/boards that work.
Also put a link to the MegaSound board.
The way it is at the moment, people will keep wasting money buying something that doesn't work well..

João

[Rob Thomson]

I am fine with that.

Java, why don't you editor the posts that are an issue, and refer to the correct link.
Joy of being a moderator

Sent from my GT-I9300 using Tapatalk 2

[Kilrah]

You can start by correcting Rob's autocorrect

Sent via mobile