Er9x and multiprotocol

er9x is the best known firmware. It has a superb range of features and is well supported by the community. Well worth trying out.
Post Reply
john888
Posts: 5
Joined: Wed May 20, 2015 1:08 am
Country: -

Er9x and multiprotocol

Post by john888 » Wed May 20, 2015 1:14 am

Hi Mike

From forum DIY electronic on RCGROUP , Midelic a great guy , he made a box with moduls 2.4ghz as cc2500,cyrf6936,nrf24l01...... to bind all RX on market .
if it was devoloped , i think it will become a super tx :lol:
we can update version here ?

http://www.rcgroups.com/forums/showthread.php?t=2165676

User avatar
MikeB
9x Developer
Posts: 15811
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Er9x and multiprotocol

Post by MikeB » Wed May 20, 2015 8:35 am

If you look at the sources of the latest commit of er9x you will see some "#ifdef MULIT_PROTOCOL" items!

Mike.
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

jjacks85
Posts: 3
Joined: Sat Dec 29, 2012 8:54 pm
Country: -

Re: Er9x and multiprotocol

Post by jjacks85 » Mon Mar 19, 2018 9:22 pm

Hi, is it possible to map model setup -> protocol -> bind to any physical button / switch? Would be nice to skip the menu navigation and have a one button bind (my micro requires binding every battery change which translates to 5 minutes). Thanks

User avatar
MikeB
9x Developer
Posts: 15811
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Er9x and multiprotocol

Post by MikeB » Mon Mar 19, 2018 11:12 pm

You should be able to use channel 16 for this (feature of the Multiprotocol module). In the protocol menu, set Autobind to "Y". Then set channel 16 to be controlled by a switch.
Running ersky9x on my FrSky QX7, I use this, with the source of channel 16 as switch SH, which is the spring loaded switch, like the TRN switch on the 9X/9XR radio.

Mike
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Post Reply

Return to “er9x”