Page 6 of 6
Re: Arduino Due add on to 9X
Posted: Thu Jun 18, 2015 3:24 pm
by OctavioS
looks promissing.
Btw, im working both my 9x's with taranis batteries (so, 2000mha 7.2v(~8.4v charged)), im wondering if this new more advanced board will work with the same batteries?
Arduino Due add on to 9X
Posted: Fri Jun 19, 2015 6:25 pm
by LTMNO
This looks very interesting. I am on board.
Sent from my iPhone using Tapatalk
Re: Arduino Due add on to 9X
Posted: Fri Jun 19, 2015 6:46 pm
by MikeB
Should work with no problems on 7.2V
Mike.
Re: Arduino Due add on to 9X
Posted: Fri Jun 19, 2015 6:48 pm
by s_mack
OctavioS wrote:looks promissing.
Btw, im working both my 9x's with taranis batteries (so, 2000mha 7.2v(~8.4v charged)), im wondering if this new more advanced board will work with the same batteries?
Yes, it will. Anything from 4xAA to a fully charged 3S should be fine. I think a fully charged 4S would be the limit, but I see no reason to go there!
Re: Arduino Due add on to 9X
Posted: Fri Jun 19, 2015 7:57 pm
by OctavioS
Ok, thx!
Enviado do meu D6633 através de Tapatalk
Re: Arduino Due add on to 9X
Posted: Wed Aug 19, 2015 1:23 am
by strongeye
I know this is an older thread but it seemed to be abandoned just about the time that Smartie Parts did their pre-announcement. Has Brent taken this any farther? I know he was working on this for more than just add on for 9x transmitters. I think this project was groundbreaking and I hate to see it fade off.
cheers
strongeye
Re: Arduino Due add on to 9X
Posted: Sun Aug 23, 2015 7:50 am
by strongeye
Resurrecting an old thread here. Did this project with the Sky9x_core ever take off? I found it compelling.
Thanks.
Strongeye
Re: Arduino Due add on to 9X
Posted: Sun Aug 30, 2015 12:16 pm
by Kilrah
viewtopic.php?f=95&t=7182
EDIT: Ah, you already know about it, it's basically what it became.
Re: Arduino Due add on to 9X
Posted: Wed Sep 02, 2015 9:00 pm
by SkyNorth
I have been working on a different style of board.
This uses the same connections of the 9x.
Except it has 0.10" connections for the LCD and Menu keys
-Brent
Re: Arduino Due add on to 9X
Posted: Wed Sep 02, 2015 10:39 pm
by jhsa
I thought you gave up
João
Re: Arduino Due add on to 9X
Posted: Thu Sep 03, 2015 1:27 pm
by SkyNorth
The other Core design I was working on , needed to many things to be added to use as a stand alone board.
This way it makes it easier for DIY'ers to connect and test their boards..the JST style wire harnesses are available on ebay for cheap..
-Brent
Re: Arduino Due add on to 9X
Posted: Fri Sep 04, 2015 12:12 am
by flybabo
What's the dimension of the board?
Re: Arduino Due add on to 9X
Posted: Fri Sep 04, 2015 11:09 am
by SkyNorth
The board is 93mm x 50mm
Re: Arduino Due add on to 9X
Posted: Fri Sep 04, 2015 12:19 pm
by jhsa
SkyNorth wrote:The other Core design I was working on , needed to many things to be added to use as a stand alone board.
This way it makes it easier for DIY'ers to connect and test their boards..the JST style wire harnesses are available on ebay for cheap..
Here is what the Schematic looks like.
coretx-9x_v1_1.pdf
Once the Design is tested ...
I will make the PCB Gerber files available so people can
make their own boards...So the Design is open source.
-Brent
Thank you very much. This is fantastic.
Re: Arduino Due add on to 9X
Posted: Fri Sep 04, 2015 8:17 pm
by flybabo
SkyNorth wrote:The board is 93mm x 50mm
Perfect!