Arduino Due add on to 9X

er9x is the best known firmware. It has a superb range of features and is well supported by the community. Well worth trying out.
User avatar
OctavioS
Posts: 588
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

Re: Arduino Due add on to 9X

Post by OctavioS » Thu Jun 18, 2015 3:24 pm

looks promissing.
Btw, im working both my 9x's with taranis batteries (so, 2000mha 7.2v(~8.4v charged)), im wondering if this new more advanced board will work with the same batteries?
3 x - 9X TX with 9xtreme board;
Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s.
Too much radios? Yes too much damn radios. No more please.

"Sometimes you just have to take a leap and build your wings on the way down."


User avatar
LTMNO
Posts: 1049
Joined: Fri Nov 30, 2012 9:31 pm
Country: Canada
Location: Toronto, Canada

Arduino Due add on to 9X

Post by LTMNO » Fri Jun 19, 2015 6:25 pm

This looks very interesting. I am on board.


Sent from my iPhone using Tapatalk
Custom 9x with M64/Telemetry Mod

User avatar
MikeB
9x Developer
Posts: 16622
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Arduino Due add on to 9X

Post by MikeB » Fri Jun 19, 2015 6:46 pm

Should work with no problems on 7.2V

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

s_mack
Posts: 880
Joined: Thu Dec 29, 2011 6:11 am
Country: -

Re: Arduino Due add on to 9X

Post by s_mack » Fri Jun 19, 2015 6:48 pm

OctavioS wrote:looks promissing.
Btw, im working both my 9x's with taranis batteries (so, 2000mha 7.2v(~8.4v charged)), im wondering if this new more advanced board will work with the same batteries?
Yes, it will. Anything from 4xAA to a fully charged 3S should be fine. I think a fully charged 4S would be the limit, but I see no reason to go there!

User avatar
OctavioS
Posts: 588
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

Re: Arduino Due add on to 9X

Post by OctavioS » Fri Jun 19, 2015 7:57 pm

Ok, thx!

Enviado do meu D6633 através de Tapatalk
3 x - 9X TX with 9xtreme board;
Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s.
Too much radios? Yes too much damn radios. No more please.

"Sometimes you just have to take a leap and build your wings on the way down."


strongeye
Posts: 1
Joined: Wed Aug 19, 2015 1:12 am
Country: -

Re: Arduino Due add on to 9X

Post by strongeye » Wed Aug 19, 2015 1:23 am

I know this is an older thread but it seemed to be abandoned just about the time that Smartie Parts did their pre-announcement. Has Brent taken this any farther? I know he was working on this for more than just add on for 9x transmitters. I think this project was groundbreaking and I hate to see it fade off.

cheers
strongeye

strongeye
Posts: 1
Joined: Wed Aug 19, 2015 1:12 am
Country: -

Re: Arduino Due add on to 9X

Post by strongeye » Sun Aug 23, 2015 7:50 am

Resurrecting an old thread here. Did this project with the Sky9x_core ever take off? I found it compelling.

Thanks.

Strongeye

User avatar
Kilrah
Posts: 10295
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Arduino Due add on to 9X

Post by Kilrah » Sun Aug 30, 2015 12:16 pm

viewtopic.php?f=95&t=7182

EDIT: Ah, you already know about it, it's basically what it became.

SkyNorth
Posts: 958
Joined: Tue Dec 27, 2011 11:40 am
Country: -
Location: Mansfield , Ontario

Re: Arduino Due add on to 9X

Post by SkyNorth » Wed Sep 02, 2015 9:00 pm

I have been working on a different style of board.
This uses the same connections of the 9x.
Except it has 0.10" connections for the LCD and Menu keys

-Brent
Attachments
CORETX-9X.jpg

User avatar
jhsa
Posts: 19042
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Arduino Due add on to 9X

Post by jhsa » Wed Sep 02, 2015 10:39 pm

I thought you gave up :) ;)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

SkyNorth
Posts: 958
Joined: Tue Dec 27, 2011 11:40 am
Country: -
Location: Mansfield , Ontario

Re: Arduino Due add on to 9X

Post by SkyNorth » Thu Sep 03, 2015 1:27 pm

The other Core design I was working on , needed to many things to be added to use as a stand alone board.
This way it makes it easier for DIY'ers to connect and test their boards..the JST style wire harnesses are available on ebay for cheap..
-Brent
Attachments
coretx-9x_v1_1.pdf
(76.81 KiB) Downloaded 275 times
Last edited by SkyNorth on Tue Nov 24, 2015 10:17 pm, edited 1 time in total.

flybabo
Posts: 143
Joined: Wed May 16, 2012 11:41 pm
Country: United States
Location: SF Bay Area, CA

Re: Arduino Due add on to 9X

Post by flybabo » Fri Sep 04, 2015 12:12 am

What's the dimension of the board?

SkyNorth
Posts: 958
Joined: Tue Dec 27, 2011 11:40 am
Country: -
Location: Mansfield , Ontario

Re: Arduino Due add on to 9X

Post by SkyNorth » Fri Sep 04, 2015 11:09 am

The board is 93mm x 50mm

User avatar
jhsa
Posts: 19042
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Arduino Due add on to 9X

Post by jhsa » Fri Sep 04, 2015 12:19 pm

SkyNorth wrote:The other Core design I was working on , needed to many things to be added to use as a stand alone board.
This way it makes it easier for DIY'ers to connect and test their boards..the JST style wire harnesses are available on ebay for cheap..

Here is what the Schematic looks like.
coretx-9x_v1_1.pdf
Once the Design is tested ...
I will make the PCB Gerber files available so people can
make their own boards...So the Design is open source.

-Brent
Thank you very much. This is fantastic.
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

flybabo
Posts: 143
Joined: Wed May 16, 2012 11:41 pm
Country: United States
Location: SF Bay Area, CA

Re: Arduino Due add on to 9X

Post by flybabo » Fri Sep 04, 2015 8:17 pm

SkyNorth wrote:The board is 93mm x 50mm
Perfect!


Post Reply

Return to “er9x”