Page 2 of 5

Re: ER9X User Guide

Posted: Sat Oct 13, 2012 7:16 am
by Rob Thomson
There is 'talk' of the frsky system supporting this once the PXX protocol is fully supported.

Re: ER9X User Guide

Posted: Sat Oct 13, 2012 7:18 am
by Kilrah
Yes, but to answer his question TODAY it's normal he doesn't have model match with anything else than DSMX ;)

Re: ER9X User Guide

Posted: Sat Oct 13, 2012 7:21 am
by Rob Thomson
Of course My previous post said that too :mrgreen: :mrgreen: :mrgreen:

Re: ER9X User Guide

Posted: Sat Oct 13, 2012 3:06 pm
by DAVEC921
Thanks for the quick reply's. Yes I am running the stock RX an TX. So no model match. I plan in the future to switch later to frysky or DSMX down the road.
Thanks again
DAVE

Re: ER9X User Guide

Posted: Wed Oct 24, 2012 1:37 pm
by Helle
Hy,

its so simply:
As long as you have an PPM interface from TX-controllerboard to the HF-Modul you cant get modellmatch, because
for modellmath you need a seriell interface from TX-controller to HF-Modul to get the Channel infos and the modelltyp-info

This is not specific a problem of TH9x its for all old and modern TX which only have a PPM interface
Most of the new "modern" system have no modellmath!

But for example: T7AH-2400, a cheap 7 channel RC-System from ZD has modellmath, look at ebay Honkong 30-50$
The Handling is from Spectrum DX7 DX8 but it has more funktions and modelmath

And Normal binding is only binding the receiver to the transmitter but not the modell-nummer at the Trasnmitter too.


Helle

Re: ER9X User Guide DE German

Posted: Tue Oct 30, 2012 7:44 pm
by Eagle71
Hello,
this is for German speaking Persons.

Hallo,
an alle deutsch sprechenden (lesenden).

Ich hab deine englische Bedienungsanleitung ins deutsche übersetzt.
Ansehen oder downloaden mit dem Link:
http://serfaus-fiss-ladis.org/er9x/ER9x_mit_Inhalt1.pdf

Für Verbesserungen bin ich natürlich auch dankbar. Wenns geht per PN. Eine HP muss ich ers Basteln, erscheint dann logischerweise unter: http://serfaus-fiss-ladis.org/er9x

Gruss Eagle71

Re: ER9X User Guide

Posted: Tue Nov 13, 2012 4:32 am
by BruceWayne
Cound someone explain what the "!" means in switch selection !SW1, compared to SW1 without the exclamation mark. The user guide makes no distinction between them.

Re: ER9X User Guide

Posted: Tue Nov 13, 2012 8:11 am
by Kilrah
It's a logic inversion, so !SW1 is active when SW1 isn't, and vice versa.
er9x manual wrote:The “!” sign. Whenever you see the “!” sign you can read that as “not” or “inverted”. Switches can be “normal” or “inverted”. So when choosing the elevator d/r switch ELE is normal operation and !ELE denotes inverted operation.

Re: ER9X User Guide

Posted: Tue Nov 13, 2012 8:26 am
by kaos
think ! = not or off
!SW1 = not SW1 = SW1 off

only nerdy computer programer use it this way. :lol: all the math use it as sigma.

Re: ER9X User Guide

Posted: Tue Nov 13, 2012 1:49 pm
by Rob Thomson
That is because it is a symbol from many programming languages

X != Y

means

X is not equal to Y

:)

Re: ER9X User Guide

Posted: Tue Nov 13, 2012 5:44 pm
by kaos
that is what I said. ;) which language started this? C ?

Long time ago, when 'normal' people were still doing the programing, it was " .not. ". But I think later on, after the Nerds Invasion, and started this "!". ;) And now we have the Nerds Invasion II, started this 'half' and 'max'. :lol: :lol: :lol:

Re: ER9X User Guide

Posted: Wed Nov 14, 2012 12:42 pm
by jhsa
watch the NERDS, they're everywhere :mrgreen: :mrgreen:

Re: ER9X User Guide

Posted: Fri Dec 07, 2012 1:26 pm
by FliteShutter
Hello. I'm using the latest firmware of ER9X (r708). i was looking for the MAX under the EDIT MIX SOURCE all I can see are FULL and HALF. Another thing is how can I configure my MIXER to this setting? I couldn't get "+" on the first row of the CH1-7.

CH1 + 100% AIL
+ 100% AIL
CH2 + 100% ELE
+ 100% ELE
CH3 + 100% THR
+ 100% THR
CH4 + 100% RUD
+ 100% RUD
CH5 + 71% MAX ID0
+ 5% MAX ID1
+ -62% MAX ID2
R 35% FULL RUD
CH6 + 100% P2
CH7 + 74% FULL GEAR
R -4% FULL AIL

I couldn't get "+" on the first row of the CH1-7. This is what I got.

CH1 100% AIL
+ 100% AIL
CH2 100% ELE
+ 100% ELE
CH3 100% THR
+ 100% THR
CH4 100% RUD
+ 100% RUD
CH5 71% MAX ID0
+ 5% MAX ID1
+ -62% MAX ID2
R 35% FULL RUD
CH6 100% P2
CH7 74% FULL GEAR
R -4% FULL AIL


I'll be using it on my Naza setup. Hope somebody can help me. Thanks a lot.

Re: ER9X User Guide

Posted: Fri Dec 07, 2012 8:01 pm
by Kilrah
Latest is r780, not r708 - r708 is 10 months old ;)
MAX has been renamed to HALF.

By the way, I don't think you would want to set such things:
CH1 + 100% AIL
+ 100% AIL

This would mean your AIL stick would give full output with only half stick deflection.

Re: ER9X User Guide

Posted: Sat Dec 08, 2012 2:40 am
by FliteShutter
Thanks for the answer.

This is what I want to copy on my ER9x mixer.
http://www.rcgroups.com/forums/showpost ... stcount=22

Do you have another template for a naza gps set up? I will highly appreciate it. Thanks again.

Re: ER9X User Guide

Posted: Sat Dec 08, 2012 8:39 am
by schmit
Hi, everybody

This is a rooky question !

Latest er9x version is r780.
My TGY 9X is flashed with r778 but I can't know changes between r778 and r780.
How I can determine opportunities to re-flash my transmitter with the last version ?
Thanks for your help

Re: ER9X User Guide

Posted: Sat Dec 08, 2012 9:04 am
by Kilrah

Re: ER9X User Guide

Posted: Sat Jan 05, 2013 7:27 pm
by KanishkaRC
Hi Guys,

I updated the Er9x Manual with LCD screenshots so that the manual looks more professional.
I am not sure whether this been done before but I hope you will find this update useful and interesting.

Please find the ODT and PDF versions of the files in the attachment along with the set of screenshots.
ScreenShots.zip
(47.9 KiB) Downloaded 338 times
ER9x Users Manual_With Er9x ScreenShots.pdf
(433.6 KiB) Downloaded 611 times
ER9x Users Manual_With Er9x ScreenShots.odt
(628.38 KiB) Downloaded 373 times
Chears

PS : Suggested changes by Jhsa is done.

Re: ER9X User Guide

Posted: Sat Jan 05, 2013 9:23 pm
by jhsa
It looks very nice..
At the end of the manual on the templates section, Page 33, there's a line that reads:
"Change source to “MAX” and Weight to “-100”."

MAX Should be changed to HALF

Re: ER9X User Guide

Posted: Thu Feb 07, 2013 11:20 am
by JEANALTAYR
hello
last edit of french r782 FRSKY manuel
improvement proposals accepted with pleasure especially for screenshots
best regards JMI

Re: ER9X User Guide

Posted: Fri Feb 08, 2013 1:14 am
by JEANALTAYR
my friend in charge of reading do not understand and
give me an other explanation of Gvars .
please update
P34 de la notice open9X

Les variables globales se substituent à la valeur numérique d'un taux de mixage, de dual-rate ou d'expo.

Ces variables peuvent être, au besoin, liées à une fonction associées à un interrupteur (cf. « Fonctions
associées à des interrupteurs » 10/12) pour permettre leur modification en vol par un organe de

commande (trim électronique ou potentiomètre). De plus, chaque variable peut avoir une valeur

différente par phase de vol, ce qui peut substantiellement diminuer le nombre de mixages pour les
différenciation de taux (différentiel, courbure de profil, etc.) par phase.

Chaque courbe ou variable globale est utilisable par autant de fonctions que nécessaire

Re: ER9X User Guide

Posted: Fri Feb 08, 2013 6:38 am
by Rob Thomson
Should this be in the open9x user guide? Not the er9x guide?

Think you may have got the wrong thread. :-)

Sent from my GT-I9300 using Tapatalk 2

Re: ER9X User Guide

Posted: Fri Feb 08, 2013 9:56 am
by JEANALTAYR
hi Rob ,
agree with you.
have you a magic sentence for clear explanation of Gvars better than me in ER9X. I try to translate please

:oops: jmi
Rob Thomson wrote:Should this be in the open9x user guide? Not the er9x guide?

Think you may have got the wrong thread. :-)

Sent from my GT-I9300 using Tapatalk 2

Re: ER9X User Guide

Posted: Fri Feb 08, 2013 10:30 am
by HC1969
Again:
The continuously updated Hungarian User guide for ER9X here:
http://rc-miskolc.emiter.hu/rc-miskolc/ ... Itemid=135
Image

Re: ER9X User Guide

Posted: Mon Mar 04, 2013 12:04 am
by JEANALTAYR
hello
last edit of french r782 FRSKY manuel "screens'
improvement proposals accepted with pleasure
best regards JMI

Re: ER9X Global VARS

Posted: Tue Mar 05, 2013 1:14 am
by Crowstooth
I've just flashed version er9x-r785 and it now has page 11 (I'm using er9x basic, no frsky). Can anyone tell me what Global vars is for? It's not in the manual yet.
I hope this is the right place to post this, sorry if it's not.
John.

Re: ER9X User Guide

Posted: Tue Mar 05, 2013 7:44 am
by Rob Thomson
Search then forum for gvars.

There are some active threads in the subject at the moment. :-P

Sent from my GT-I9300 using Tapatalk 2

Re: ER9X User Guide

Posted: Tue Mar 05, 2013 9:41 am
by MikeB
Some info here: viewtopic.php?f=48&t=2938#p42174.

MENU LONG on a field taht may be a GVAR switches between a constant value and a GVAR.

Mike.

Re: ER9X User Guide

Posted: Sat Mar 09, 2013 3:20 am
by BobRhoades1602
Hi all
I've been spending a few hours watching videos and many hours programing my ER9X. I have what I think I can work with for the plans I want to fly. I'm scared to death of losing or messing hours of work. My question to you all is how can I transfer my work from the radio to my computer?
I know that there is a way to save to the épée in my computer.. Just a little guidance.
Thanks Bob

Re: ER9X User Guide

Posted: Sat Mar 09, 2013 8:28 am
by Kilrah
Burn menu -> Read EEPROM memory to file.