ER9X User Guide

er9x is the best known firmware. It has a superb range of features and is well supported by the community. Well worth trying out.
User avatar
Rob Thomson
Site Admin
Posts: 4537
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

Re: ER9X User Guide

Post by Rob Thomson » Sat Oct 13, 2012 7:16 am

There is 'talk' of the frsky system supporting this once the PXX protocol is fully supported.
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!

User avatar
Kilrah
Posts: 9666
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: ER9X User Guide

Post by Kilrah » Sat Oct 13, 2012 7:18 am

Yes, but to answer his question TODAY it's normal he doesn't have model match with anything else than DSMX ;)

User avatar
Rob Thomson
Site Admin
Posts: 4537
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

Re: ER9X User Guide

Post by Rob Thomson » Sat Oct 13, 2012 7:21 am

Of course My previous post said that too :mrgreen: :mrgreen: :mrgreen:
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!

User avatar
DAVEC921
Posts: 14
Joined: Fri Aug 31, 2012 3:29 pm
Country: -

Re: ER9X User Guide

Post by DAVEC921 » Sat Oct 13, 2012 3:06 pm

Thanks for the quick reply's. Yes I am running the stock RX an TX. So no model match. I plan in the future to switch later to frysky or DSMX down the road.
Thanks again
DAVE

Helle
Posts: 572
Joined: Sat Jul 21, 2012 7:08 am
Country: -

Re: ER9X User Guide

Post by Helle » Wed Oct 24, 2012 1:37 pm

Hy,

its so simply:
As long as you have an PPM interface from TX-controllerboard to the HF-Modul you cant get modellmatch, because
for modellmath you need a seriell interface from TX-controller to HF-Modul to get the Channel infos and the modelltyp-info

This is not specific a problem of TH9x its for all old and modern TX which only have a PPM interface
Most of the new "modern" system have no modellmath!

But for example: T7AH-2400, a cheap 7 channel RC-System from ZD has modellmath, look at ebay Honkong 30-50$
The Handling is from Spectrum DX7 DX8 but it has more funktions and modelmath

And Normal binding is only binding the receiver to the transmitter but not the modell-nummer at the Trasnmitter too.


Helle


User avatar
Eagle71
Posts: 11
Joined: Fri Sep 07, 2012 3:01 pm
Country: -

Re: ER9X User Guide DE German

Post by Eagle71 » Tue Oct 30, 2012 7:44 pm

Hello,
this is for German speaking Persons.

Hallo,
an alle deutsch sprechenden (lesenden).

Ich hab deine englische Bedienungsanleitung ins deutsche übersetzt.
Ansehen oder downloaden mit dem Link:
http://serfaus-fiss-ladis.org/er9x/ER9x_mit_Inhalt1.pdf

Für Verbesserungen bin ich natürlich auch dankbar. Wenns geht per PN. Eine HP muss ich ers Basteln, erscheint dann logischerweise unter: http://serfaus-fiss-ladis.org/er9x

Gruss Eagle71

BruceWayne
Posts: 3
Joined: Tue Nov 13, 2012 4:24 am
Country: -

Re: ER9X User Guide

Post by BruceWayne » Tue Nov 13, 2012 4:32 am

Cound someone explain what the "!" means in switch selection !SW1, compared to SW1 without the exclamation mark. The user guide makes no distinction between them.

User avatar
Kilrah
Posts: 9666
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: ER9X User Guide

Post by Kilrah » Tue Nov 13, 2012 8:11 am

It's a logic inversion, so !SW1 is active when SW1 isn't, and vice versa.
er9x manual wrote:The “!” sign. Whenever you see the “!” sign you can read that as “not” or “inverted”. Switches can be “normal” or “inverted”. So when choosing the elevator d/r switch ELE is normal operation and !ELE denotes inverted operation.

User avatar
kaos
Posts: 3247
Joined: Wed Dec 28, 2011 1:15 am
Country: United States

Re: ER9X User Guide

Post by kaos » Tue Nov 13, 2012 8:26 am

think ! = not or off
!SW1 = not SW1 = SW1 off

only nerdy computer programer use it this way. :lol: all the math use it as sigma.

User avatar
Rob Thomson
Site Admin
Posts: 4537
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

Re: ER9X User Guide

Post by Rob Thomson » Tue Nov 13, 2012 1:49 pm

That is because it is a symbol from many programming languages

X != Y

means

X is not equal to Y

:)
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!

User avatar
kaos
Posts: 3247
Joined: Wed Dec 28, 2011 1:15 am
Country: United States

Re: ER9X User Guide

Post by kaos » Tue Nov 13, 2012 5:44 pm

that is what I said. ;) which language started this? C ?

Long time ago, when 'normal' people were still doing the programing, it was " .not. ". But I think later on, after the Nerds Invasion, and started this "!". ;) And now we have the Nerds Invasion II, started this 'half' and 'max'. :lol: :lol: :lol:

User avatar
jhsa
Posts: 18129
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ER9X User Guide

Post by jhsa » Wed Nov 14, 2012 12:42 pm

watch the NERDS, they're everywhere :mrgreen: :mrgreen:
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

FliteShutter
Posts: 2
Joined: Fri Dec 07, 2012 4:27 am
Country: -

Re: ER9X User Guide

Post by FliteShutter » Fri Dec 07, 2012 1:26 pm

Hello. I'm using the latest firmware of ER9X (r708). i was looking for the MAX under the EDIT MIX SOURCE all I can see are FULL and HALF. Another thing is how can I configure my MIXER to this setting? I couldn't get "+" on the first row of the CH1-7.

CH1 + 100% AIL
+ 100% AIL
CH2 + 100% ELE
+ 100% ELE
CH3 + 100% THR
+ 100% THR
CH4 + 100% RUD
+ 100% RUD
CH5 + 71% MAX ID0
+ 5% MAX ID1
+ -62% MAX ID2
R 35% FULL RUD
CH6 + 100% P2
CH7 + 74% FULL GEAR
R -4% FULL AIL

I couldn't get "+" on the first row of the CH1-7. This is what I got.

CH1 100% AIL
+ 100% AIL
CH2 100% ELE
+ 100% ELE
CH3 100% THR
+ 100% THR
CH4 100% RUD
+ 100% RUD
CH5 71% MAX ID0
+ 5% MAX ID1
+ -62% MAX ID2
R 35% FULL RUD
CH6 100% P2
CH7 74% FULL GEAR
R -4% FULL AIL


I'll be using it on my Naza setup. Hope somebody can help me. Thanks a lot.

User avatar
Kilrah
Posts: 9666
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: ER9X User Guide

Post by Kilrah » Fri Dec 07, 2012 8:01 pm

Latest is r780, not r708 - r708 is 10 months old ;)
MAX has been renamed to HALF.

By the way, I don't think you would want to set such things:
CH1 + 100% AIL
+ 100% AIL

This would mean your AIL stick would give full output with only half stick deflection.

FliteShutter
Posts: 2
Joined: Fri Dec 07, 2012 4:27 am
Country: -

Re: ER9X User Guide

Post by FliteShutter » Sat Dec 08, 2012 2:40 am

Thanks for the answer.

This is what I want to copy on my ER9x mixer.
http://www.rcgroups.com/forums/showpost ... stcount=22

Do you have another template for a naza gps set up? I will highly appreciate it. Thanks again.

schmit
Posts: 1
Joined: Sat Dec 08, 2012 8:19 am
Country: -

Re: ER9X User Guide

Post by schmit » Sat Dec 08, 2012 8:39 am

Hi, everybody

This is a rooky question !

Latest er9x version is r780.
My TGY 9X is flashed with r778 but I can't know changes between r778 and r780.
How I can determine opportunities to re-flash my transmitter with the last version ?
Thanks for your help

User avatar
Kilrah
Posts: 9666
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: ER9X User Guide

Post by Kilrah » Sat Dec 08, 2012 9:04 am


KanishkaRC
Posts: 35
Joined: Sun Sep 02, 2012 8:57 pm
Country: -

Re: ER9X User Guide

Post by KanishkaRC » Sat Jan 05, 2013 7:27 pm

Hi Guys,

I updated the Er9x Manual with LCD screenshots so that the manual looks more professional.
I am not sure whether this been done before but I hope you will find this update useful and interesting.

Please find the ODT and PDF versions of the files in the attachment along with the set of screenshots.
ScreenShots.zip
(47.9 KiB) Downloaded 312 times
ER9x Users Manual_With Er9x ScreenShots.pdf
(433.6 KiB) Downloaded 587 times
ER9x Users Manual_With Er9x ScreenShots.odt
(628.38 KiB) Downloaded 348 times
Chears

PS : Suggested changes by Jhsa is done.
Last edited by KanishkaRC on Thu Feb 07, 2013 9:35 pm, edited 3 times in total.

User avatar
jhsa
Posts: 18129
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ER9X User Guide

Post by jhsa » Sat Jan 05, 2013 9:23 pm

It looks very nice..
At the end of the manual on the templates section, Page 33, there's a line that reads:
"Change source to “MAX” and Weight to “-100”."

MAX Should be changed to HALF
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
JEANALTAYR
Posts: 103
Joined: Thu Dec 29, 2011 4:53 pm
Country: -
Location: Gd Toulouse FRANCE

Re: ER9X User Guide

Post by JEANALTAYR » Thu Feb 07, 2013 11:20 am

hello
last edit of french r782 FRSKY manuel
improvement proposals accepted with pleasure especially for screenshots
best regards JMI
Attachments
ER9xManuel Francais r782. frsky.pdf
(567.09 KiB) Downloaded 445 times

User avatar
JEANALTAYR
Posts: 103
Joined: Thu Dec 29, 2011 4:53 pm
Country: -
Location: Gd Toulouse FRANCE

Re: ER9X User Guide

Post by JEANALTAYR » Fri Feb 08, 2013 1:14 am

my friend in charge of reading do not understand and
give me an other explanation of Gvars .
please update
P34 de la notice open9X

Les variables globales se substituent à la valeur numérique d'un taux de mixage, de dual-rate ou d'expo.

Ces variables peuvent être, au besoin, liées à une fonction associées à un interrupteur (cf. « Fonctions
associées à des interrupteurs » 10/12) pour permettre leur modification en vol par un organe de

commande (trim électronique ou potentiomètre). De plus, chaque variable peut avoir une valeur

différente par phase de vol, ce qui peut substantiellement diminuer le nombre de mixages pour les
différenciation de taux (différentiel, courbure de profil, etc.) par phase.

Chaque courbe ou variable globale est utilisable par autant de fonctions que nécessaire

User avatar
Rob Thomson
Site Admin
Posts: 4537
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

Re: ER9X User Guide

Post by Rob Thomson » Fri Feb 08, 2013 6:38 am

Should this be in the open9x user guide? Not the er9x guide?

Think you may have got the wrong thread. :-)

Sent from my GT-I9300 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!

User avatar
JEANALTAYR
Posts: 103
Joined: Thu Dec 29, 2011 4:53 pm
Country: -
Location: Gd Toulouse FRANCE

Re: ER9X User Guide

Post by JEANALTAYR » Fri Feb 08, 2013 9:56 am

hi Rob ,
agree with you.
have you a magic sentence for clear explanation of Gvars better than me in ER9X. I try to translate please

:oops: jmi
Rob Thomson wrote:Should this be in the open9x user guide? Not the er9x guide?

Think you may have got the wrong thread. :-)

Sent from my GT-I9300 using Tapatalk 2

User avatar
HC1969
Posts: 421
Joined: Wed Dec 28, 2011 8:47 am
Country: Hungary
Location: Istvan Magi
Contact:

Re: ER9X User Guide

Post by HC1969 » Fri Feb 08, 2013 10:30 am

Again:
The continuously updated Hungarian User guide for ER9X here:
http://rc-miskolc.emiter.hu/rc-miskolc/ ... Itemid=135
Image
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!

User avatar
JEANALTAYR
Posts: 103
Joined: Thu Dec 29, 2011 4:53 pm
Country: -
Location: Gd Toulouse FRANCE

Re: ER9X User Guide

Post by JEANALTAYR » Mon Mar 04, 2013 12:04 am

hello
last edit of french r782 FRSKY manuel "screens'
improvement proposals accepted with pleasure
best regards JMI
Attachments
ER9xManuel Francais r782. frskySCR1.pdf
(550.17 KiB) Downloaded 402 times

Crowstooth
Posts: 10
Joined: Sat Oct 27, 2012 7:23 pm
Country: -

Re: ER9X Global VARS

Post by Crowstooth » Tue Mar 05, 2013 1:14 am

I've just flashed version er9x-r785 and it now has page 11 (I'm using er9x basic, no frsky). Can anyone tell me what Global vars is for? It's not in the manual yet.
I hope this is the right place to post this, sorry if it's not.
John.

User avatar
Rob Thomson
Site Admin
Posts: 4537
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

Re: ER9X User Guide

Post by Rob Thomson » Tue Mar 05, 2013 7:44 am

Search then forum for gvars.

There are some active threads in the subject at the moment. :-P

Sent from my GT-I9300 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!

User avatar
MikeB
9x Developer
Posts: 15807
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ER9X User Guide

Post by MikeB » Tue Mar 05, 2013 9:41 am

Some info here: viewtopic.php?f=48&t=2938#p42174.

MENU LONG on a field taht may be a GVAR switches between a constant value and a GVAR.

Mike.
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

BobRhoades1602
Posts: 7
Joined: Sat Sep 08, 2012 7:34 pm
Country: United States
Location: Hudsonville, MI.

Re: ER9X User Guide

Post by BobRhoades1602 » Sat Mar 09, 2013 3:20 am

Hi all
I've been spending a few hours watching videos and many hours programing my ER9X. I have what I think I can work with for the plans I want to fly. I'm scared to death of losing or messing hours of work. My question to you all is how can I transfer my work from the radio to my computer?
I know that there is a way to save to the épée in my computer.. Just a little guidance.
Thanks Bob

User avatar
Kilrah
Posts: 9666
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: ER9X User Guide

Post by Kilrah » Sat Mar 09, 2013 8:28 am

Burn menu -> Read EEPROM memory to file.

Post Reply

Return to “er9x”