ER9X User Guide

er9x is the best known firmware. It has a superb range of features and is well supported by the community. Well worth trying out.
User avatar
Rob Thomson
Site Admin
Posts: 4537
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

ER9X User Guide

Post by Rob Thomson » Sat Feb 04, 2012 4:16 pm

A guide for er9x can be found on the following link.

http://openrcforums.com/wiki/index.php/Er9x_user_guide

If you feel anything is missing or would like to assist in editing.. pm me and we can assign permissions.
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!

User avatar
Peter
Posts: 232
Joined: Thu Dec 29, 2011 8:45 pm
Country: -
Location: Zuid-Holland

Re: ER9X User Guide

Post by Peter » Wed Mar 28, 2012 8:10 am

Looks good!

User avatar
agusta600gt
Posts: 106
Joined: Mon Jan 09, 2012 5:45 pm
Country: -
Location: Hebertville,Quebec,Canada

Re: ER9X User Guide

Post by agusta600gt » Thu Apr 05, 2012 11:01 am

About the swashring ...

ive read:Swash Ring: As the name implies. This limits stick movement just like a physical swash ring. Notice that this only works on AIL and ELE regardless of radio mode selected.

Id like to set it up need more clues cuz as it is,its not working ;)

My settings are based on the heli template

could it be because 1 of my swash channel is reversed ? i doubt it...

thanks

User avatar
gohsthb
Posts: 1412
Joined: Wed Dec 28, 2011 2:32 pm
Country: -
Location: Naperville, IL

Re: ER9X User Guide

Post by gohsthb » Thu Apr 05, 2012 3:18 pm

What does not working mean? It doesn't limit swash movement or the swash simply won't move? By default the wash ring is set to 0. This turns it off, so you get full movement from you servos. Try setting it to 20, and adjust from there. I set mine so full throw is just short of binding. Then I use the dual rates to get a travel that I am comfortable flying with.
-Gohst

User avatar
kaos
Posts: 3247
Joined: Wed Dec 28, 2011 1:15 am
Country: United States

Re: ER9X User Guide

Post by kaos » Thu Apr 05, 2012 4:37 pm

Augusta600gt:

Take a look at this: viewtopic.php?f=57&t=510

swash ring only changes your cyclic pitch, not collective.

I am behind, as usual, writing up the detailed instruction. but you can get just about everything from that topic. The eepe at the end may work a little better.
Last edited by kaos on Sat Apr 07, 2012 9:13 am, edited 1 time in total.


User avatar
JEANALTAYR
Posts: 103
Joined: Thu Dec 29, 2011 4:53 pm
Country: -
Location: Gd Toulouse FRANCE

Re: ER9X User Guide

Post by JEANALTAYR » Sat Apr 07, 2012 9:04 am

here is a last version of french guide

hope this help
Attachments
ER9xManuel Francais r744 frsky.pdf
(595.38 KiB) Downloaded 549 times

User avatar
JEANALTAYR
Posts: 103
Joined: Thu Dec 29, 2011 4:53 pm
Country: -
Location: Gd Toulouse FRANCE

Re: ER9X User Guide

Post by JEANALTAYR » Sat Apr 07, 2012 9:10 am

a try
english update and telemetry guide
jmi
Attachments
FrSKY r742 guide try .docx
(783.67 KiB) Downloaded 832 times

User avatar
agusta600gt
Posts: 106
Joined: Mon Jan 09, 2012 5:45 pm
Country: -
Location: Hebertville,Quebec,Canada

Re: ER9X User Guide

Post by agusta600gt » Sat Apr 07, 2012 11:17 am

hehehe...Thanks....

User avatar
JEANALTAYR
Posts: 103
Joined: Thu Dec 29, 2011 4:53 pm
Country: -
Location: Gd Toulouse FRANCE

Re: ER9X User Guide

Post by JEANALTAYR » Mon May 14, 2012 8:07 am

hello
now it's time to go on the slope with last version guide r760
(rectifications accepted :!:)
jmi
Attachments
FrSKY r760 guideTry .docx
(786.24 KiB) Downloaded 420 times

User avatar
JEANALTAYR
Posts: 103
Joined: Thu Dec 29, 2011 4:53 pm
Country: -
Location: Gd Toulouse FRANCE

Re: ER9X User Guide

Post by JEANALTAYR » Mon May 14, 2012 11:22 pm

here is a r760 version of french guide
Changes are hilighted for partial edition greener .......
JMI
Attachments
ER9xManuel Francais r760. frsky.pdf
(580.6 KiB) Downloaded 349 times

User avatar
JEANALTAYR
Posts: 103
Joined: Thu Dec 29, 2011 4:53 pm
Country: -
Location: Gd Toulouse FRANCE

Re: ER9X User Guide

Post by JEANALTAYR » Thu May 17, 2012 8:41 am

hello r 762 with telemetry evos for francophones
JMI
Attachments
ER9xManuel Francais r762. frsky.pdf
(611.62 KiB) Downloaded 369 times

User avatar
JEANALTAYR
Posts: 103
Joined: Thu Dec 29, 2011 4:53 pm
Country: -
Location: Gd Toulouse FRANCE

Re: ER9X User Guide

Post by JEANALTAYR » Thu May 17, 2012 8:45 am

hello fr762
last version guide
(rectifications accepted ;) )
Attachments
FrSKY r762 guideTry .docx
(765.9 KiB) Downloaded 797 times

OldCrock
Posts: 4
Joined: Thu Jul 19, 2012 5:47 pm
Country: -

Re: ER9X User Guide

Post by OldCrock » Thu Jul 19, 2012 6:52 pm

Hi Guys.
I hope I am at the right place.
I have been digging all over and cannot find help.
Where can I find User Guides or any info on what the logic is behind things like Mixes & Switches on the ER9X.
I see on the Switches this afternoon that I can use logic functions, but would like a lot more info.
I don't want examples, I want to learn the logic behind the radio.
Thanks.

User avatar
jhsa
Posts: 18135
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ER9X User Guide

Post by jhsa » Thu Jul 19, 2012 8:38 pm

Well you can start here..

http://openrcforums.com/wiki/index.php/Er9x_user_guide

I hope it helps..

Also to play with it easily on your PC you should get eepe if you don't already have it..

http://code.google.com/p/eepe/
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
Rob Thomson
Site Admin
Posts: 4537
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

Re: ER9X User Guide

Post by Rob Thomson » Thu Jul 19, 2012 9:12 pm

Maybe we need to rename the wiki link too:

User guides & how to's!

Sent from my Nexus 7 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!

G550Ted
Posts: 389
Joined: Tue Dec 27, 2011 6:15 pm
Country: -
Location: Savannah, GA, USA

Re: ER9X User Guide

Post by G550Ted » Fri Jul 20, 2012 11:24 am

I think that is a good idea.

Ted

User avatar
gohsthb
Posts: 1412
Joined: Wed Dec 28, 2011 2:32 pm
Country: -
Location: Naperville, IL

Re: ER9X User Guide

Post by gohsthb » Fri Jul 20, 2012 11:50 am

You can learn the logic by studying other's examples.
-gohst

Sent from my LG-P999 using Tapatalk 2

OldCrock
Posts: 4
Joined: Thu Jul 19, 2012 5:47 pm
Country: -

Re: ER9X User Guide

Post by OldCrock » Sun Jul 22, 2012 12:14 pm

Hi jhsa and others.
I have been through those links, but we are still not at the crucx of the matter.
For Instance, with Multi Lines in the Mixes for the same chanel, which lines have priority and if Multiple lines evaluate to a TRUE, which one is used. This is the type of thing I am looking for.
I see the examples, but there is not much explanation of why things are done in a certain way.
Anyway, maybe I am just barking up yhe wrong tree, so lets call it quits.
Thanks Regards.

User avatar
Kilrah
Posts: 9671
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: ER9X User Guide

Post by Kilrah » Sun Jul 22, 2012 1:26 pm

OldCrock wrote: For Instance, with Multi Lines in the Mixes for the same chanel, which lines have priority and if Multiple lines evaluate to a TRUE, which one is used. This is the type of thing I am looking for.
Miser lines on a same channel are added by default, starting from the top and descending. There are options though, namely the Multiplex parameter that can be set to Replace (in which case, if that mixer line is active, it replaces all previous ones) or multiply (multiplies the output of all previous lines).

All explained here.
http://openrcforums.com/wiki/index.php/ ... n_Screen_2

OldCrock
Posts: 4
Joined: Thu Jul 19, 2012 5:47 pm
Country: -

Re: ER9X User Guide

Post by OldCrock » Tue Jul 24, 2012 3:38 pm

OK, Thanks Kilrah.
I will go through that step by step. It looks like good info.

boolhead
Posts: 1
Joined: Tue Jun 12, 2012 12:31 am
Country: -

Re: ER9X User Guide

Post by boolhead » Mon Aug 13, 2012 8:42 am

Greetings,
i have translated the latest ER9X user's guide into simplified Chinese, i think this is useful for er9x users from mainland of China.
shall i upload that .pdf directly here or just a link to the googlecode repository(https://code.google.com/p/er9x-manual-cn/)?

User avatar
Eagle71
Posts: 11
Joined: Fri Sep 07, 2012 3:01 pm
Country: -

Re: ER9X User Guide

Post by Eagle71 » Fri Sep 07, 2012 3:31 pm

Hello,
i try to translate the manual to german. I use http://openrcforums.com/wiki/index.php/Er9x_user_guide
as base for it. Is this the actual manual?
The pictures are a little pit dark, maybe i copy the pic's out of the PDF version.

I hobe i can show you the GE-Manual soon.

Hallo,
ich versuche die Bedienungsanleitung ins deutsche zu übersetzen. (Dauert halt noch einwenig).
Ist die http://openrcforums.com/wiki/index.php/Er9x_user_guide aktuell oder gibts was besseres?
Die Bilder sind etwas dunkel, ansonsten verwende ich die Bilder aus der PDF Version.

Ich hoffe ich melde mich bald mit der fertigen Version.

Ciao
Eagle71

User avatar
jmboladeras
Posts: 1
Joined: Sat Sep 08, 2012 8:54 am
Country: -

Re: ER9X User Guide

Post by jmboladeras » Sat Sep 08, 2012 5:43 pm

Hello:
I made the translation of the User Guide ER9x to Catalan language and I am pleased to attach it for anyone can need.

Kind regards.

Hola,
He fet la traducció al català de la Guia d'Usuari de l'ER9x i em complau d'adjuntar-la per a tothom a qui li pugui ser d'utilitat.

Cordials salutacions.

Josep M.
Attachments
Er9x Manual cat.pdf
(3.67 MiB) Downloaded 663 times

JRMSR
Posts: 15
Joined: Mon Jul 30, 2012 11:34 pm
Country: -

Re: ER9X User Guide

Post by JRMSR » Tue Sep 18, 2012 1:58 am

Rob Thomson wrote:A guide for er9x can be found on the following link.

http://openrcforums.com/wiki/index.php/Er9x_user_guide

If you feel anything is missing or would like to assist in editing.. pm me and we can assign permissions.

how come my ER9X is different than this manual, I only have HALF and FULL under EDIT MIX SOURCE, no MAX how to eliminate -weight
any other manual that has HALF and FULL info, how to work around -weight????

User avatar
Kilrah
Posts: 9671
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: ER9X User Guide

Post by Kilrah » Tue Sep 18, 2012 5:44 am

MAX was renamed to HALF some time ago, so that's what you're looking for.

JRMSR
Posts: 15
Joined: Mon Jul 30, 2012 11:34 pm
Country: -

Re: ER9X User Guide

Post by JRMSR » Wed Sep 19, 2012 11:48 pm

Kilrah wrote:MAX was renamed to HALF some time ago, so that's what you're looking for.
and thank you very much, that is how you get rid of -weight great

User avatar
DAVEC921
Posts: 14
Joined: Fri Aug 31, 2012 3:29 pm
Country: -

Re: ER9X User Guide

Post by DAVEC921 » Sat Oct 13, 2012 5:43 am

I just recently was able to power up a rx. I successfully bound it to channel One. While playing with the mixes an such I accidentally switched by Tx from channel 1 to channel 2. The servos still moved. I thought when you bound a rx to the tx it was also keyed to one channel. Am I wrong on this? Was just wanting to make sure I did not mess up when I bound the rx to the tx

Sent from my C771 using Tapatalk 2

User avatar
ShowMaster
Posts: 4320
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: ER9X User Guide

Post by ShowMaster » Sat Oct 13, 2012 6:15 am

To the best of my knowledge er9x by its self does not have the equivalent of Spektrums model match function that matches mix memories to each RX. Any RX bound to the 9x will respond to any memory selected. I believe the Pxx protocol will do what your thinking but others will have more facts on that. I also think it involves a Frsky module and RX firmware update.
There are warnings posted by MikeB and Rob I believe warning not to change memories with the tx in control of the plane to avoids just what you've experienced for safety's sake.
I'm sure more facts will be posted by others.
If you do the Spektrum mod and run er9x that will do what your thinking.



ShowMaster
Sent from my iPod touch using Tapatalk

User avatar
Rob Thomson
Site Admin
Posts: 4537
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

Re: ER9X User Guide

Post by Rob Thomson » Sat Oct 13, 2012 6:45 am

If you use the dsm hack modules, then you get model match.

The matching tech is a rf module feature ;-)

Sent from my Nexus 7 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!

User avatar
Kilrah
Posts: 9671
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: ER9X User Guide

Post by Kilrah » Sat Oct 13, 2012 7:09 am

DAVEC921 wrote:I just recently was able to power up a rx. I successfully bound it to channel One.
Which kind of RF modules are you using?
Of those commonly used with the 9x, only the DSM mod with a DSMX-capable module and receiver will have model match. The stock RF doesn't support that.

Post Reply

Return to “er9x”