Sound Driver Updates
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Sound Driver Updates
Hi All,
Thanks to some rather fancy coding by Bertrand35 we have a fundamental update to the audio sound system. Bit like the same car.. with a more efficient engine!
i have been working with Bertrand for the past few days generally testing/bug fixing and believe all is now stable and working ok.
The attached files contain a pre release of the firmware for anyone who fancies testing before Eraz gets the master compile done!
Any feedback appreciated!
Rob
Thanks to some rather fancy coding by Bertrand35 we have a fundamental update to the audio sound system. Bit like the same car.. with a more efficient engine!
i have been working with Bertrand for the past few days generally testing/bug fixing and believe all is now stable and working ok.
The attached files contain a pre release of the firmware for anyone who fancies testing before Eraz gets the master compile done!
Any feedback appreciated!
Rob
- Attachments
-
- firmware.zip
- (174.62 KiB) Downloaded 246 times
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
- agusta600gt
- Posts: 106
- Joined: Mon Jan 09, 2012 5:45 pm
- Country: -
- Location: Hebertville,Quebec,Canada
Re: Sound Driver Updates
just flashed it and its better than before...new boot sound,,,new low voltage alarm sound (ER9X)
good work
good work
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
Sound Driver Updates
What ! Someone beat me to dload? Tabernacq!
---
I am here: http://maps.google.com/maps?ll=44.056227,-79.476246
---
I am here: http://maps.google.com/maps?ll=44.056227,-79.476246
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
Re: Sound Driver Updates
er9x version..
Bl is on until splash is gone, then the light goes off. (light off 'after x has no effect'.)
no matter what you set the bl off timer to too.
This also happens when changing model. light on, change model, boom light off... no matter what setting bl off is set to. (if you go back to the model setup - right press, the backlight will stay on, it's only when switching models)
Model change warning is inconsistent. Used to be two beeps, rapid. Now it's two quick chirps sometimes quick, mostly a sec or so apart, not consistent.
It's the first thing I noticed.. was annoying having the backlight just suddenly go off... when you're used to seeing it stay on until the bl timer turns it off.
So... how is the sound suppose to sound?
Bl is on until splash is gone, then the light goes off. (light off 'after x has no effect'.)
no matter what you set the bl off timer to too.
This also happens when changing model. light on, change model, boom light off... no matter what setting bl off is set to. (if you go back to the model setup - right press, the backlight will stay on, it's only when switching models)
Model change warning is inconsistent. Used to be two beeps, rapid. Now it's two quick chirps sometimes quick, mostly a sec or so apart, not consistent.
It's the first thing I noticed.. was annoying having the backlight just suddenly go off... when you're used to seeing it stay on until the bl timer turns it off.
So... how is the sound suppose to sound?
Re: Sound Driver Updates
my fault, sorry..cr8tive_leo wrote:What ! Someone beat me to dload? Tabernacq!
---
I am here: http://maps.google.com/maps?ll=44.056227,-79.476246
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- agusta600gt
- Posts: 106
- Joined: Mon Jan 09, 2012 5:45 pm
- Country: -
- Location: Hebertville,Quebec,Canada
Re: Sound Driver Updates
mouahahaha look at Leo trying to swear .....well thats a good one...
Shish....I should say that too...im a flashing addict on my Android Galaxy S
I dunno ...you may have a possessed TX cuz mine is working as before except for that new bootsound and alarrrrrmaaaaaa
lights off after xx works for me and all the rest.Its cuz youve started swearing my poor Leo mouahahaha
Shish....I should say that too...im a flashing addict on my Android Galaxy S
I dunno ...you may have a possessed TX cuz mine is working as before except for that new bootsound and alarrrrrmaaaaaa
lights off after xx works for me and all the rest.Its cuz youve started swearing my poor Leo mouahahaha
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
Re: Sound Driver Updates
Flashing.. with your android...
In public?
French.. eh...
hee hee.
In public?
French.. eh...
hee hee.
- agusta600gt
- Posts: 106
- Joined: Mon Jan 09, 2012 5:45 pm
- Country: -
- Location: Hebertville,Quebec,Canada
Re: Sound Driver Updates
well they still sell the galaxyS with 2.3.5 while mine is on 2.3.6 with the same things as GalaxyS2......
ohhh sorry ............... about those sounds mods...id like to have the heli intro of pink floyd THE WALL mouahahaha
ohhh sorry ............... about those sounds mods...id like to have the heli intro of pink floyd THE WALL mouahahaha
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
Re: Sound Driver Updates
sighs..
I still have the chirps... (pizo mod, no stock speaker... I like being difficult)
I have my fuse protect set.. and you can't unset them in eepe.. unless it's hidden...
I still have the chirps... (pizo mod, no stock speaker... I like being difficult)
I have my fuse protect set.. and you can't unset them in eepe.. unless it's hidden...
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Sound Driver Updates
Companion can unprotected the fuses . Not sure why it has been dropped from eepe
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
Re: Sound Driver Updates
I just have to remember where I installed it...
getting old... you know.. 43 and all...
getting old... you know.. 43 and all...
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
Re: Sound Driver Updates
So I reflashed and made more models, and switched models. it was an eprom issue... weird.
I have my snd setting for pzo xshort and 1 for the tone, so it's Fast and high pitched, I set it to stock, and yes, the start up sound is different.. so it seems to work, just issues with the eprom in one of my radios. the other radio is okay too. (but has the faster snd setup too)
I have my snd setting for pzo xshort and 1 for the tone, so it's Fast and high pitched, I set it to stock, and yes, the start up sound is different.. so it seems to work, just issues with the eprom in one of my radios. the other radio is okay too. (but has the faster snd setup too)
Re: Sound Driver Updates
I dropped the ability to "unprotect" fuses since I wanted to keep it simple. It seems to me that there is no good reason why you would need to have the fuses erased on every flash. I also wanted to make it simpler for the new users to set the fuses properly.
I see you uploaded the code to the trunk. Is is safe to compile or do you want to wait more for feedback?
I see you uploaded the code to the trunk. Is is safe to compile or do you want to wait more for feedback?
Z
BEWARE - WE ARE IN THE AIR!!!
What goes up... Should be controlled by a 9X!
BEWARE - WE ARE IN THE AIR!!!
What goes up... Should be controlled by a 9X!
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
Re: Sound Driver Updates
I had to erase the eprom for that update to work though.
not on every flash... just occasionally.
I reloaded the eprom, and it didn't work again. Just sayin... is there a different way to do that? just write a blank eprom file? I will have to try that...
not on every flash... just occasionally.
I reloaded the eprom, and it didn't work again. Just sayin... is there a different way to do that? just write a blank eprom file? I will have to try that...
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Sound Driver Updates
Seems ok to me at present!erazz wrote: I see you uploaded the code to the trunk. Is is safe to compile or do you want to wait more for feedback?
Mike spotted one potential bug... will check it out in an hour or so then let you know!
Rob
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Sound Driver Updates
Ah,
I think the best way to erase the EEPROM is to create a new file in eePe and just upload that. That will "format" your memory. I don't think that messing with the fuses in order to erase your EEPROM is a good idea.
I think the best way to erase the EEPROM is to create a new file in eePe and just upload that. That will "format" your memory. I don't think that messing with the fuses in order to erase your EEPROM is a good idea.
Z
BEWARE - WE ARE IN THE AIR!!!
What goes up... Should be controlled by a 9X!
BEWARE - WE ARE IN THE AIR!!!
What goes up... Should be controlled by a 9X!
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Sound Driver Updates
The audio class defined in audio.h includes a variable:
toneCounter
This variable does not appear to be used, a static version of it is used in driver().
Mike.
toneCounter
This variable does not appear to be used, a static version of it is used in driver().
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Sound Driver Updates
Eagle eyed mike
I will update it a bit later today.
Rob
Sent from my iPhone using Tapatalk
I will update it a bit later today.
Rob
Sent from my iPhone using Tapatalk
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Sound Driver Updates
Did this get rolled into the codebase or is it still a one off hex file? I've been using the one you uploaded for about a week and it seems to be running ok for me so far.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Sound Driver Updates
It is all in the live version already
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!